VE-JND-MX-B1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Almost all electronic circuits require a DC supply at some stage for it to function. For example, while the output of a transformer steps down AC to a lower voltage, the rectifier circuit converts AC to DC. A DC-to-DC converter is thus used to step up or down the DC voltage supplied to the circuit. It is also used to produce multiple output voltages. The maximum power of DC -to-DC converters can range from a fraction of a watt to kilowatts.

For applications involving DC-to-DC converters, the VE-JND-MX-B1 converter provides efficiency and flexibility. It is a PWM (pulse width modulation) buck switching regulator that has a wide range of input and output voltage combinations. It is intended for use in applications where space is limited and power is required from different output supplies. The VE-JND-MX-B1 is capable of outputting a large amount of current, up to 20A, and supports output voltages registered to within ±1%.

The VE-JND-MX-B1 is suitable for many different types of applications, such as powering processor chips, automotive electronics, audio and video systems, electric drives, and communication devices. It can also be used to supply multiple outputs to various peripherals like disk drives and LED displays.

The converter’s input and output pins are designed to be separately wired for maximum flexibility. This allows the converter to be used in different kinds of environments, such as industrial, commercial, and automotive. The operating temperature range is from -40 to 85 degrees Celsius, and it is protected against overload and short circuit conditions.

The VE-JND-MX-B1 works by using PWM technology to convert a DC voltage input into many different output voltages in a single module. It has an adjustable voltage range from 0.8 V to 20 V, making it suitable for supplying voltage to a variety of devices.

The converter uses an oscillator to generate a PWM signal, which is then used to control the amount of power that is output from the module. The amount of power is regulated by varying the duty cycle of the PWM signal to control the average voltage level that is output by the converter. The converter also includes synchronous rectification, which increases the overall efficiency of the converter.

The VE-JND-MX-B1 has a built-in over-voltage protection feature, which monitors the output voltage and prevents it from exceeding the security level. The over-voltage protection will shut down the output voltage if it reaches a dangerous level. It also has a soft start feature that can be enabled to prevent inrush current.

The VE-JND-MX-B1 is a highly efficient and versatile DC-to-DC converter. It has a wide range of input and output voltage combinations, making it ideal for many different types of applications. It also provides an over-voltage protection feature, and a soft start feature for protection against inrush current. The converter is designed for use in environments where space is limited and high power is required from multiple output supplies.

The specific data is subject to PDF, and the above content is for reference