| Allicdata Part #: | VE-JNF-CX-F4-ND |
| Manufacturer Part#: |
VE-JNF-CX-F4 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 72V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 72V 1.... |
| DataSheet: |  VE-JNF-CX-F4 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 1.04A |
| Base Part Number: | VE-JNF |
| Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
| Package / Case: | Half Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -25°C ~ 100°C |
| Features: | OCP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Series: | VE-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 72V |
| Voltage - Input (Max): | 76V |
| Voltage - Input (Min): | 36V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are power electronic circuits which are used in modern power systems for converting one DC voltage to another DC voltage. They are extensively used in renewable energy applications, vehicular systems, aerospace systems and high frequency switching systems. Some of the common DC-DC converters used in these applications are the VE-JNF-CX-F4 converters.
The VE-JNF-CX-F4 converter is a buck-derived design, which works on the principle of a voltage follower in a buck circuit. The converter converts the input voltage to a required output voltage through a high frequency switching process. When the input voltage is applied, the switch is turned on and the current flows through a current limiting resistor. When the switch is turned off, the current is converted to the desired output voltage, and the power is delivered to the load.
The VE-JNF-CX-F4 converter is mainly used in automotive applications, including engine control systems, low voltage DC power supplies, and electric power steering systems. The converter has an optimum efficiency of up to 95%, making it suitable for applications requiring high efficiency. It also has low noise output, making it suitable for applications sensitive to noise.
The VE-JNF-CX-F4 converter also has several safety features, which helps to protect the device from over current, over voltage and short-circuit conditions. The converter also has a current limit feature, which limits the current drawn from the input to a predefined value. This helps to prevent over current conditions in the circuit.
The VE-JNF-CX-F4 converter is one of the most popular DC-DC converters used in a wide range of applications. It is a highly efficient, low noise, and reliable converter which is easy to install and maintain. It has several safety features like over current, over voltage and short circuit protection, making it suitable for cars, aircraft and other applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...