| Allicdata Part #: | VE-JNH-IW-F1-ND |
| Manufacturer Part#: |
VE-JNH-IW-F1 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 52V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 52V 1.... |
| DataSheet: |  VE-JNH-IW-F1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 1.92A |
| Base Part Number: | VE-JNH |
| Size / Dimension: | 2.28" L x 1.86" W x 0.79" H (57.9mm x 47.2mm x 20.1mm) |
| Package / Case: | Half Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -40°C ~ 100°C |
| Features: | OCP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VE-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 52V |
| Voltage - Input (Max): | 76V |
| Voltage - Input (Min): | 36V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
DC DC Converters, or Direct Current DC-DC, are a type of device that allows you to convert direct current, or DC, power from one voltage level to another. In other words, they are used to take the power from a source, such as a battery or generator, and decrease or increase its voltage. This is done to power appliances, electronics or other systems that require the input of different voltage levels.
VE-JNH-IW-F1 Application Field and Working Principle
The VE-JNH-IW-F1 is an adjustable DC-DC converter from Vicor Corporation which is used in a variety of applications for commercial and industrial markets. It is designed for DC/DC buck-boost applications with high-efficiency, high-power/volume ratio and good response to a wide range of input voltages and output currents. The rated power of the converter is up to 300 watts and the maximum output current is 5A. The VE-JNH-IW-F1 is designed to operate as an adjustable buck or boost converter, and can be used to increase or decrease the input voltage from 24 to 400V depending on the application.
The working principle of the VE-JNH-IW-F1 is quite simple. The power is input to the converter, either from a battery or generator, and the converter adjusts the voltage to the desired level by increasing or decreasing the frequency of the alternating current. This is done using a high-frequency oscillator which outputs a square wave signal with a frequency that is determined by the voltage of the power source. The output voltage is then regulated using a voltage regulator IC to ensure that the output is stabilized at the desired level.
The VE-JNH-IW-F1 is a high-performance, high-efficiency DC-DC converter that is designed for a variety of applications. It is easy to install and configure for a wide range of input and output voltages, and is an economical solution for powering appliances, electronics or other systems.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...