Allicdata Part #: | VE-JNM-IW-F1-ND |
Manufacturer Part#: |
VE-JNM-IW-F1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 10V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 10V 10... |
DataSheet: | VE-JNM-IW-F1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 10A |
Base Part Number: | VE-JNM |
Size / Dimension: | 2.28" L x 1.86" W x 0.79" H (57.9mm x 47.2mm x 20.1mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 10V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC conversion is the process of transforming a direct current (DC) power source from one voltage level to another. DC-DC converters can be used for a variety of applications, including the control of DC motors, voltage regulation, power factor correction, and the transmission and distribution of electricity. In this article, we will discuss the application field and working principle of the Varney Electric Joint Network Module Interface Window (VE-JNM-IW-F1) DC-DC converter.
VE-JNM-IW-F1 Application Field
The VE-JNM-IW-F1 DC-DC converter is designed to provide high precision, high efficiency, and low noise operation in a variety of application areas. These include:
- Industrial electronics, such as printer drives, motor drives, and servos.
- Automotive electronics, such as powertrain systems, airbag systems, and brake electronics.
- Telecommunications systems, such as cellular base stations and networking equipment.
- Medical equipment, such as imaging systems, diagnostic equipment, and defibrillators.
- Renewable energy, such as photovoltaics and wind turbines.
The VE-JNM-IW-F1 is designed to meet the unique requirements of the aforementioned application areas. It is RoHS compliant and offers a wide input voltage range of 3.3V to 28V, allowing it to be used in a variety of different applications.
VE-JNM-IW-F1 Working Principle
The VE-JNM-IW-F1 DC-DC converter is based on a full-bridge synchronous rectifier topology, which allows for high efficiency and high power density. The converter consists of two stages: a high-frequency transformer used to step up the input voltage, and a synchronous rectifier used to convert the alternating current output of the transformer to direct current. The rectifier is then followed by a low-pass filter, which helps to reduce noise in the output signal.
The high-frequency transformer is used to transfer power between two circuits that have different voltage potentials. It is composed of two windings, a primary and a secondary, that are located within the same magnetic core. The input voltage is applied to the primary winding, while the output voltage is taken from the secondary winding. As the primary winding is energized, the flux generated in the core cuts across both secondary windings, inducing an EMF in each of the secondary windings that is proportional to the flux.
The synchronous rectifier circuit consists of two MOSFETs, one on the high-side and one on the low-side of the transformer’s secondary winding. As the EMF induced in the secondary winding reaches its peak, the high-side MOSFET is turned on, allowing current to flow from the positive terminal of the secondary winding to the output. When the EMF falls below its peak, the low-side MOSFET is turned on, allowing current to flow from the output to the negative terminal of the secondary winding. This alternating on/off of the MOSFETs allows for efficient conversion of the alternating current from the transformer’s secondary winding to direct current at the output.
Finally, the output signal is filtered by a low-pass filter. This filter helps to reduce noise in the output signal, providing a cleaner output voltage to the load.
Conclusion
The VE-JNM-IW-F1 DC-DC converter is a reliable and efficient solution for a range of application areas. It utilizes a full-bridge synchronous rectifier topology to provide high precision, high efficiency, and low noise operation, while offering a wide input voltage range of 3.3V to 28V.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...