| Allicdata Part #: | VE-JNM-MZ-B1-ND |
| Manufacturer Part#: |
VE-JNM-MZ-B1 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 10V 25W |
| More Detail: | Isolated Module DC DC Converter 1 Output 10V 2.... |
| DataSheet: | VE-JNM-MZ-B1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 2.5A |
| Base Part Number: | VE-JNM |
| Size / Dimension: | 2.36" L x 2.28" W x 1.08" H (59.9mm x 57.9mm x 27.4mm) |
| Package / Case: | Half Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 100°C |
| Features: | OCP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 25W |
| Series: | VE-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 10V |
| Voltage - Input (Max): | 76V |
| Voltage - Input (Min): | 36V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
DC DC converters form a unique group of electrical devices used to convert electricity from a DC power source into a different type of voltage or current. They’re capable of changing the power from a single voltage source and then regulating it to provide a different power output. By understanding the different types of DC converters, one can appreciate their specific application fields and working principles.
VE-JNM-MZ-B1 Application Field and Working Principle
VE-JNM-MZ-B1 is a DC-DC converter designed for high reliability, cost-effective applications. The device can accept nine to sixteen VDC input and can convert it into 3.3V or 5V DC output. It’s designed to be a board mountable, self-contained module, making it a great choice for applications where space is at a premium.
The default output voltage of the converter is set when it is plugged in and configured. This can be 3.3V or 5V, dependent on the application’s needs. The output voltage is also adjustable via the onboard trimming pots. The output is also protected against short and over voltage conditions. In the event of a short circuit or overvoltage, the converter will shut-down until the fault is cleared.
When it comes to the working principle of the VE-JNM-MZ-B1 converter, it is based on a switched-mode power supply (SMPS) principle. Basically, this device employs two power transistors, one for the buck (lowering the voltage) and one for the boost (raising the voltage), to accept an input DC voltage and convert it to a different output DC voltage. The switching of the transistors is done by pulse width modulation (PWM). Using PWM, the output voltage can be varied to match the specific needs of the application.
In summary, the VE-JNM-MZ-B1 is an efficient and reliable DC-DC converter that can convert power from a single DC source into 3.3v or 5V DC. It is designed with cost-effectiveness and space-savings in mind, making it a great choice for applications from automotive to consumer electronics.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
VE-JNM-MZ-B1 Datasheet/PDF