Allicdata Part #: | VE-JNN-CZ-F2-ND |
Manufacturer Part#: |
VE-JNN-CZ-F2 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 18.5V 25W |
More Detail: | Isolated Module DC DC Converter 1 Output 18.5V ... |
DataSheet: | VE-JNN-CZ-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 1.35A |
Base Part Number: | VE-JNN |
Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 25W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 18.5V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are often used in a variety of applications where the power supply needs to be regulated or controlled. The converter provides the most efficient way to control the current or voltage between two points. For example, Voltage-to-Current (VE-JNN-CZ-F2) converters are generally used to step down current from a higher voltage or current source to a lower voltage or current. This type of converter is typically used in automotive applications, where the battery is used to power the accessory and the electrical system.
The VE-JNN-CZ-F2 converter can contain one or more power stages and a controller driver stage. The power stage can be either a voltage-mode or current-mode topology. The voltage-mode topology has two cascaded transistor-based stages, while the current-mode topology includes two transistors on the primary and secondary sides. Thecontroller driver stage consists of a capacitive coupled gate driver that receives the controller output signal. It then drives the voltage or current switching elements to regulate the input-to-output voltage or current according to the desired settings.
The VE-JNN-CZ-F2 converter requires two power sources; a DC source and an AC source. The DC source is used to supply the input power, while the AC source is used to supply the control signal. The converter outputs a regulated voltage or current that is proportional to the applied input power. When the input power changes, the output voltage or current is adjusted to maintain the desired voltage or current regulation.
Depending on the type of application, the VE-JNN-CZ-F2 converter can also provide additional features such as thermal protection, over-voltage protection, and under-voltage protection. In applications that require high power levels, the converter can also provide additional features such as maximum power limit, maximum voltage limit, and maximum current limit.
The VE-JNN-CZ-F2 converter is ideal for use in both automotive and industrial applications. It offers efficiency, reliability, and flexibility when regulating voltage or current. It is also a cost-effective way to provide controlled power in applications such as lighting, motors, and other power-sensitive devices. As a result, it is one of the most popular DC DC converter solutions available.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...