VE-JNW-MX-F2 Power Supplies - Board Mount |
|
| Allicdata Part #: | VE-JNW-MX-F2-ND |
| Manufacturer Part#: |
VE-JNW-MX-F2 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 5.5V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 5.5V 1... |
| DataSheet: |  VE-JNW-MX-F2 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 13.64A |
| Base Part Number: | VE-JNW |
| Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
| Package / Case: | Half Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 100°C |
| Features: | OCP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Series: | VE-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 5.5V |
| Voltage - Input (Max): | 76V |
| Voltage - Input (Min): | 36V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
VE-JNW-MX-F2 is a 3-phase DC DC converter used to control the voltage of a DC power source. It is widely used in the automotive, IT equipment, and medical equipment fields. The following sections will discuss the application field and working principle of the VE-JNW-MX-F2 converter.
Application Field
VE-JNW-MX-F2 converters are typically used in the automotive, IT equipment, and medical equipment fields. These industries require precise voltage control of their systems, and VE-JNW-MX-F2 is designed to provide this control. In automotive applications, VE-JNW-MX-F2 can be used for power distribution, voltage regulation, and battery charging. In IT equipment, it can be used to control the voltage of a processor or graphics card. In medical equipment, it can be used to regulate the voltage of a medical imaging device.
Working Principle
VE-JNW-MX-F2 is a 3-phase DC DC converter that is designed to reduce the voltage of a DC power source. It works by using a transformer to step down the voltage of the power source. The transformer works by taking the input voltage and magnetically inducing a lower voltage output. The output voltage is then regulated using the integrated PWM controller, which can be adjusted to match the desired output voltage. Finally, the output voltage is rectified and sent to the load.
Advantages
VE-JNW-MX-F2 has several advantages over other DC DC converters. First, it is designed to be highly efficient, with over 90% efficiency. This allows for minimal power loss during operation and reduces the overall cost of the system. Second, it has a wide input voltage range, allowing for a variety of voltages to be supplied to the system. Finally, it is designed to be small and lightweight, which makes it ideal for applications where space and weight are at a premium.
Conclusion
In conclusion, the VE-JNW-MX-F2 is a 3-phase DC DC converter that is designed to control the voltage of a DC power source. It has several advantages over other DC DC converters, such as efficiency, wide input voltage range, and small size. The VE-JNW-MX-F2 is widely used in the automotive, IT equipment, and medical equipment fields, where precise voltage control is required.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...