VE-JNX-CX-S

Current - Output (Max):	14.42A
Base Part Number:	VE-JNX
Size / Dimension:	2.28" L x 1.80" W x 0.52" H (57.9mm x 45.7mm x 13.2mm)
Package / Case:	Half Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-25°C ~ 100°C
Features:	OCP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	75W
Series:	VE-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5.2V
Voltage - Input (Max):	76V
Voltage - Input (Min):	36V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC DC converters refer to a type of electronic devices used to convert a DC power source to a different voltage and polarity output. These devices can be either linear (continuous) or switch mode (PWM). They are used in a wide variety of applications from powering small electronic devices such as mobile phones to large industrial systems such as aircraft and spacecraft.The VE, JNX, CX and S series of DC DC converters are all switch-mode type devices which are designed to be power efficient and reliable. VE series converters are usually used in the low-power range of applications, such as small consumer electronics. The JNX series DC DC converters are designed to be used in power level applications, such as in industrial and aerospace applications. The CX series converters are designed for higher-power applications, from industrial-grade to executive luxury cars. Finally, the S series of DC DC converters are used for very high power ratings, typically in defense and aerospace applications.The basic principle of operation for all DC DC converters is to step down the voltage of the input source and to also adjust the polarity of the output. This is done by controlling the flow of current through a switch that has two components, a transformer (which can either be an inductor or a capacitor), and a control device (often referred to as a "switch driver").The switch driver is what controls the on/off switching of the switch, and is responsible for the rapid switching of current flow in order to achieve the desired output. It is this rapid switching of current that enables the DC converter to achieve the desired voltage and polarity.The transformer is responsible for reducing the voltage and adjusting the polarity of the output. This is done by having a coil of wire that is wrapped around a metal core which is connected to the input source. When the switch is switched on, a magnetic field is produced in the core which induces an electrical current in the coil. This current is then transferred to the output, where it is further regulated to the desired voltage and polarity.Another important component of a DC DC converter is the rectifier. This is a device which is responsible for taking the alternating current (AC) from the transformer and converting it into a direct current (DC). This is done via the use of diodes in a bridge rectifier circuit.The major advantage of the DC DC converter is its high power efficiency and reliability. This makes them ideal for uses in many different industries, from consumer electronics to industrial applications.In summary, the VE, JNX, CX and S series of DC DC converters are switch-mode type electronic devices which are designed to efficiently and reliably convert a DC power source to a different voltage and polarity output. They are typically used in applications ranging from low-power consumer electronics to highly power-intensive industrial and aerospace applications.

The specific data is subject to PDF, and the above content is for reference