Allicdata Part #: | VE-JNZ-CX-F1-ND |
Manufacturer Part#: |
VE-JNZ-CX-F1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 2V 30W |
More Detail: | Isolated Module DC DC Converter 1 Output 2V 15A... |
DataSheet: | VE-JNZ-CX-F1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 15A |
Base Part Number: | VE-JNZ |
Size / Dimension: | 2.28" L x 1.86" W x 0.79" H (57.9mm x 47.2mm x 20.1mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 30W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 2V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power converters are an important aspect of the electrical grid, including DC-DC converters. In particular, the VE-JNZ-CX-F1 is a common type of DC- DC converter that is used in a variety of applications, from power generation applications to energy management applications. This article will discuss the applications in which the VE-JNZ-CX-F1 is used and the working principle upon which it operates.
Application Field of VE-JNZ-CX-F1
The VE-JNZ-CX-F1 is a popular type of DC-DC converter, which is used in a variety of applications. For example, the VE-JNZ-CX-F1 is used in the energy management sector, where it is employed for voltage regulation, power factor correction, motor control, and more. Additionally, VE-JNZ-CX-F1 is often found in power generation applications. This includes solar, wind, and hydroelectric power plants, all of which require a reliable DC-DC converter to control the flow of electricity between the generator and the load and to balance voltages. The VE-JNZ-CX-F1 is also commonly used in UPS systems, mainly to regulate the output voltage and provide a stable source of power.
Working Principle of VE-JNZ-CX-F1
The VE-JNZ-CX-F1 is a three-phase converter, and its working principle is based on the current-source topology (CST). This topology consists of two separate input and output ports, each of which is connected to its own power source. The two ports are then connected via a transformer, where the input current is converted into the output voltage. The converter is designed to withstand high voltage and to regulate the power flow through a constantly varying frequency of operation.
In addition, the VE-JNZ-CX-F1 has a control loop, which controls the operation of the converter. This control loop consists of a feedback loop that receives input from the primary current and voltage sensors. The control loop then uses this information to adjust the converter’s operation in order to maintain the specified output voltage and current conditions. The VE-JNZ-CX-F1 also comes with an extensive range of protections, such as overload, overcurrent, and over-temperature protection, so that it is able to safely and reliably operate.
Conclusion
The VE-JNZ-CX-F1 is a DC-DC converter that is commonly used in a variety of applications, from power generation to energy management, and its working principle is based on the current-source topology (CST). The VE-JNZ-CX-F1 has an extensive range of protections and a control loop that allows it to maintain the desired output voltage and current conditions. Additionally, the VE-JNZ-CX-F1 is able to withstand high voltages and has a constantly varying frequency of operation.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...