Allicdata Part #: | VE-JNZ-MX-F2-ND |
Manufacturer Part#: |
VE-JNZ-MX-F2 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 2V 30W |
More Detail: | Isolated Module DC DC Converter 1 Output 2V 15A... |
DataSheet: | VE-JNZ-MX-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 15A |
Base Part Number: | VE-JNZ |
Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 30W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 2V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters offer a number of advantages in a wide range of applications. They are used to supply electricity to remote, rural, and isolated areas where grid power is unavailable. These converters can also be used to power high demand devices, such as computers and telecommunication systems. One of the most popular types of power converters is the VE-JNZ-MX-F2 DC-DC converter.
The VE-JNZ-MX-F2 DC-DC converter is a full-bridge, four-phase converter that offers high efficiency, increased power density, and reliable operation in a wide range of applications. The converter has two main components: the controller and the power transplants. The controller is responsible for controlling the operation of the converter and performing safety and thermal protection. The power transistors are responsible for transferring power from the source to the load. The controller and the power transistors are connected to the power source, which then supplies power to the load.
The VE-JNZ-MX-F2 DC-DC converter is suitable for use in applications such as motor control, servo motor control, brushless DC motor control, power supply, and energy management. The converter has a wide input voltage range from 8 VDC to 260 VDC, and can be configured for single-phase or three-phase operation. The controller features a high switching frequency, up to 150 kHz, which allows for fast response and efficient operation. The controller also provides a wide range of protection features such as undervoltage lockout, overvoltage protection, and over temperature shutdown.
The VE-JNZ-MX-F2 DC-DC converter can operate in both continuous conduction mode (CCM) and discontinuous conduction mode (DCM). In CCM mode, the inductor current is kept above a certain level, and thus losses due to switching are minimized. In DCM mode, the inductor current reaches zero before the transistor turns off, and thus switching losses are minimized. In addition, the converter can also operate in discontinuous input current mode (DIOM), where the input current is limited to the input voltage, and thus efficiency is improved.
The VE-JNZ-MX-F2 DC-DC converter is an efficient and reliable power converter and is suitable for a wide range of applications. It has a wide input voltage range and can be configured for single-phase or three-phase operation. The converter also features a high switching frequency and has a wide range of protection features. In addition, the converter can also operate in CCM, DCM, and DIOM mode, and thus offers excellent efficiency and reliability.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...