VE-JT1-EX-B1

Current - Output (Max):	6.25A
Base Part Number:	VE-JT1
Size / Dimension:	2.36" L x 2.28" W x 1.08" H (59.9mm x 57.9mm x 27.4mm)
Package / Case:	Half Brick
Mounting Type:	Through Hole
Efficiency:	88%
Operating Temperature:	-10°C ~ 100°C
Features:	OCP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	75W
Series:	VE-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	12V
Voltage - Input (Max):	160V
Voltage - Input (Min):	66V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC–DC converters are electronic components that can convert a voltage signal to either a higher or lower voltage signal for a variety of applications. The VE-JT1-EX-B1 is a DC–DC converter module designed for high-voltage applications. It is capable of input voltage up to 450Vdc and can output a current up to 20A. It is also designed for high efficiency, with a maximum efficiency of 96%.The VE-JT1-EX-B1 is typically used for power supply and power management applications, such as in mobile phones, tablets, computers, and other consumer electronics. This module is designed to meet the most demanding requirements of today’s devices, such as support for high-power applications, fast response time, low power consumption, and high efficiency.The VE-JT1-EX-B1 is based on a full-bridge switching structure that uses power MOSFETs (Metal Oxide Semiconductor Field Effect Transistors). This allows for high-frequency operation with minimal losses and superior efficiency. The module has a switching frequency of up to 2MHz, allowing for more efficient operation compared to traditional power converters.The VE-JT1-EX-B1 is designed with protection features to prevent overloading or overheating. It has a protection circuit with a bandgap reference to monitor both the input and output voltages. In the case of an overvoltage or overcurrent, it will shut down the converter until conditions return to normal. The module also includes a hiccup mode that will limit the output current to a safe level should a fault occur.The module also has a thermal shutdown circuit that will limit the temperature to a safe level to prevent damage to the internal components. It also has an over-current monitor, which will shut down the module if the output current exceeds a certain threshold.The VE-JT1-EX-B1 is also designed with programmable protection features such as an input under-voltage lockout (UVLO) and an output over-voltage protection (OVP). This allows the user to adjust the protection levels to suit the application requirements.In summary, the VE-JT1-EX-B1 is a high-efficiency DC–DC converter module designed for high-voltage applications. It has a switching frequency of up to 2MHz and is protected from overloading and overheating. It also has programmable protection features such as an input under-voltage lockout and an output over-voltage protection. This makes the module suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference