Allicdata Part #: | VE-JTM-IW-F4-ND |
Manufacturer Part#: |
VE-JTM-IW-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 10V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 10V 10... |
DataSheet: | VE-JTM-IW-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 10A |
Base Part Number: | VE-JTM |
Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 10V |
Voltage - Input (Max): | 160V |
Voltage - Input (Min): | 66V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are specially designed to convert direct current (DC) signals into either high-voltage or low-voltage DC signals. The input voltage of DC-DC converters is typically limited to a range between 10 and 100 Volts, and can be either regulated or unregulated. Some DC-DC converters also provide a smoothing function that reduces the effect of fluctuations in the input voltage. The output voltage of a DC-DC converter is typically in the range of 0.5 to 1 Volts.
A typical DC-DC converter is the VE-JTM-IW-F4. This type of converter is used to convert a regulated DC input voltage into a high-voltage DC signal. The VE-JTM-IW-F4 consists of a field-effect transistor (FET), an insulated-gate bipolar transistor (IGBT) and a reverse conducting thyristor (RCD). The FET is used as the main switching element in the converter, while the IGBT provides an alternative direction of current flow. The RCD is used to protect the device from over-voltage.
The VE-JTM-IW-F4 works by converting the DC input voltage into high-voltage AC signals. This AC signal is then rectified and then filtered and regulated by the IGBT and FET to form a DC output. The output voltage can be controlled by adjusting the pulse width modulation (PWM) and duty cycle. The output voltage and current are regulated by monitoring the load current and voltage on the output side of the converter.
The VE-JTM-IW-F4 offers several advantages over other DC-DC converters. It is efficient, with low switching losses and high conversion efficiency. It is also durable, with a long lifetime and minimal maintenance requirements. Finally, this type of converter is suitable for use in a wide range of applications, including automotive, renewable energy, LED lighting and medical applications.
In summary, the VE-JTM-IW-F4 is a durable and efficient DC-DC converter. It is suitable for a wide range of applications, and offers high switching efficiency and the ability to easily control the output voltage and current.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...