Allicdata Part #: | VE-JTM-MY-F1-ND |
Manufacturer Part#: |
VE-JTM-MY-F1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 10V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 10V 5A... |
DataSheet: | VE-JTM-MY-F1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 5A |
Base Part Number: | VE-JTM |
Size / Dimension: | 2.28" L x 1.86" W x 0.79" H (57.9mm x 47.2mm x 20.1mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 50W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 10V |
Voltage - Input (Max): | 160V |
Voltage - Input (Min): | 66V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC to DC converters are widely used in many industries and applications for both personal and commercial use. The most common type of DC to DC converters are VE-JTM-MY-F1 converters. This type of converter is designed to convert a direct current (DC) input voltage level into another DC voltage level. It is commonly used in communication and instrumentation systems where a constant DC voltage level is essential for optimal performance.
VE-JTM-MY-F1 converters use a bridge circuit made with four electronic components. The four components are two thyristors, two capacitors, and one inductor. When power is applied to the bridge circuit, two of the components will turn on. This causes a change in voltage across the components which results in a voltage conversion.
In addition to voltage conversion, this type of converter is also used for power isolation and peak current limitation. The thyristors in the bridge circuit limit the amount of current flowing through the circuit. This prevents excessive current draw that could result in component failure and damage. The inductor is also important as it provides AC frequency correction.
The peak current limitation feature of the VE-JTM-MY-F1 converter can also be used in applications where fast transients or sudden loads can occur. For example, in a PC power supply, the converter can prevent damage to the components due to sudden changes in power demand.
VE-JTM-MY-F1 converters are often used in many different industries. They are used in the automotive industry for providing power to ECU units and other vehicle electronic systems. They are used in industrial applications such as providing power to industrial robots and control systems. In telecommunications, they are used to ensure that the communication systems remain functional during power disruptions. Finally, in the medical and medical devices industry, they are used to ensure the continuous operation of medical equipment.
VE-JTM-MY-F1 converters provide an efficient and reliable power source for many applications. With their peak current limitation and AC frequency correction features, these converters are ideal for providing constant power and prevention of overloads and damage to components. They are in widespread use today and will continue to be utilized in many industries in the future.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...