| Allicdata Part #: | VE-JTW-EX-F2-ND |
| Manufacturer Part#: |
VE-JTW-EX-F2 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 5.5V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 5.5V 1... |
| DataSheet: |  VE-JTW-EX-F2 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 13.64A |
| Base Part Number: | VE-JTW |
| Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
| Package / Case: | Half Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 88% |
| Operating Temperature: | -10°C ~ 100°C |
| Features: | OCP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Series: | VE-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 5.5V |
| Voltage - Input (Max): | 160V |
| Voltage - Input (Min): | 66V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electrical devices that are used to convert a direct current input into a different direct current output. They can provide an output voltage that is either higher or lower than the input voltage, depending on the type of converter used. The VE-JTW-EX-F2 application field and working principle are examples of a DC-DC converter.
The VE-JTW-EX-F2 is a low-power DC-DC converter with a wide input voltage range of 9.5 to 36 Volts DC. It can be used to step up or down the input voltage to produce an output voltage that is either higher or lower than the input voltage. It is designed to be used in a variety of applications including solar power, renewable energy production, and automotive electronics.
The VE-JTW-EX-F2 has a product efficiency of up to 95%, which is higher than most other DC-DC converters on the market. The efficiency of a DC-DC converter is an important factor to consider when choosing a converter for an application. The device also has a wide input voltage range and a low output noise.
The working principle of the VE-JTW-EX-F2 is based on the pulse width modulation (PWM) technique. This technique is used to convert the input voltage into a different output voltage. The input voltage is converted into a pulse width modulated signal using an integrated control circuit. The width of the pulse is controlled by the feedback circuitry and the output voltage is then produced. The output voltage is regulated and regulated according to the length of the pulse.
The VE-JTW-EX-F2 can be used in a variety of applications such as industrial, automotive, consumer, and medical. It is designed to be used in applications that require a high reliability and long life. The device is also designed to be energy efficient and low cost. The device can be used in a variety of applications such as automotive electronic systems, renewable energy production, and solar power.
The VE-JTW-EX-F2 is a reliable and energy efficient DC-DC converter that can be used in a variety of applications. It is designed to be used in applications that require a high reliability and long life. The device is also designed to be energy efficient and low cost. The wide input voltage range and high product efficiency make the VE-JTW-EX-F2 an excellent choice for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...