VE-JTY-CX-S

Current - Output (Max):	15A
Base Part Number:	VE-JTY
Size / Dimension:	2.28" L x 1.80" W x 0.52" H (57.9mm x 45.7mm x 13.2mm)
Package / Case:	Half Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-25°C ~ 100°C
Features:	OCP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	50W
Series:	VE-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	3.3V
Voltage - Input (Max):	160V
Voltage - Input (Min):	66V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are an essential part of many electronic systems, as they can be used to convert voltage levels, such as from higher to lower, or vice versa. A variety of methods have been developed to convert voltage levels in power supplies, ranging from linear regulators to switch-mode power supplies (SMPSs).One family of DC-DC converter are so-called “VE-JTY-CX-S” converters, which are transistor-based converters that utilize two transistors and a diode to obtain a step-up voltage conversion. VE-JTY-CX-S converters are especially suitable for use in portable electronics, because of their small size and low power dissipation.The basic working principle of the VE-JTY-CX-S converter is a simple one. It relies on two switching transistors, a control or driver-transistor and a power or output-transistor, and a diode to control the output voltage. The control-transistor is controlled with a pulse width modulation-signal, so that it is either on or off. When the control transistor is on, it will turn on the power transistor, which will in turn transfer energy from the input to the output.The voltage at the output of the converter will then be higher than the input voltage, as the diode acts as a rectifier and prevents the current from flowing back to the input-power. Thus, a step-up voltage is obtained at the output.The exact output voltage level depends on the duty cycle of the PWM-signal applied to the control-transistor. This duty cycle is adjusted by a voltage-control circuit, which also prevents the output voltage from exceeding a predetermined level. Furthermore, the output voltage of the converter can also be controlled with the input voltage, in order to prevent over-voltage or under-voltage conditions.VE-JTY-CX-S converters are therefore very versatile DC-DC converters, as they can be used to adjust the output voltage within a wide range of voltages. They are also particularly useful for portable electronic systems, as they are small in size and have low power and thermal dissipation. Moreover, they are also well suited for powering RF systems, since they have low electromagnetic interference and can be used to step up the voltage level to the desired level.In conclusion, VE-JTY-CX-S converters are an invaluable tool for many electronic systems, as they can be used to convert the input voltage level to a higher or lower voltage level. Their small size, low power dissipation and low electromagnetic interference makes them particularly well suited for use in portable electronic systems such as mobile phones and tablets. As such, VE-JTY-CX-S converters should be considered as an important part of any DC-DC conversion technology.

The specific data is subject to PDF, and the above content is for reference