| Allicdata Part #: | VE-JV1-IZ-F1-ND |
| Manufacturer Part#: |
VE-JV1-IZ-F1 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 12V 25W |
| More Detail: | Isolated Module DC DC Converter 1 Output 12V 2.... |
| DataSheet: |  VE-JV1-IZ-F1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 2.08A |
| Base Part Number: | VE-JV1 |
| Size / Dimension: | 2.28" L x 1.86" W x 0.79" H (57.9mm x 47.2mm x 20.1mm) |
| Package / Case: | Half Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -40°C ~ 100°C |
| Features: | OCP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 25W |
| Series: | VE-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 12V |
| Voltage - Input (Max): | 36V |
| Voltage - Input (Min): | 9V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC Converters are most often used to provide power supplies for electronic systems. This type of conversion is used when the input voltage is too high to safely use in a system. In a DC-DC converter, the voltage is stepped down to an appropriate voltage for use in a system. One type of converter that is often used is the VE-JV1-IZ-F1 converter. This type of converter has various applications and works in a specific way.
The VE-JV1-IZ-F1 converter is designed for use in variety of power systems, such as inverters, AC/DC converters, adjustable speed drives, motor drives, uninterruptible power supplies, and solar panel systems. The main benefit of this type of converter is that it provides a regulated output voltage despite changes in the input voltage. This makes it ideal for applications where the system needs to remain stable despite changes in the voltage source.
The working principle of the VE-JV1-IZ-F1 converter is based on the buck-boost topology. This topology uses two voltage sources to power the converter. An inductor is placed between these two voltage sources, and is used to regulate the output voltage from the converter. The inductor smooths the output voltage, and works to reduce the surge in the voltage when it changes from the one voltage source to the other.
The output voltage of the VE-JV1-IZ-F1 converter is adjustable, and is controlled through the use of a Pulse Width Modulation (PWM) signal. The PWM signal is generated by the converter itself, and is used to control the amount of power that is transferred between the two voltage sources. The output voltage is regulated by adjusting the PWM signal in the converter.
The VE-JV1-IZ-F1 converter is a versatile and efficient way to convert the input voltage to a suitable level for use in a system. The converter uses the buck‑boost topology to step down the input voltage, and the output voltage is regulated by the PWM signal. The converter is suitable for use in a variety of power systems, and has the benefit of providing a reliable and steady input voltage despite changing input voltages.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...