Allicdata Part #: | VE-JVM-MZ-ND |
Manufacturer Part#: |
VE-JVM-MZ |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 10V 25W |
More Detail: | Isolated Module DC DC Converter 1 Output 10V 2.... |
DataSheet: | VE-JVM-MZ Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 2.5A |
Base Part Number: | VE-JVM |
Size / Dimension: | 2.28" L x 2.40" W x 0.50" H (57.9mm x 70.0mm x 12.7mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 25W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 10V |
Voltage - Input (Max): | 36V |
Voltage - Input (Min): | 9V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are used to convert electrical energy from one voltage level to another. A DC-DC converter in the VE-JVM-MZ application field is a power converter that is capable of providing a specified range of regulated output voltages whilst operating from a single DC input. They are often used to step down the voltage from a higher voltage supply, such as an AC supply, to a lower voltage level that is appropriate for use in an electrical device.
The VE-JVM-MZ power converter is a high-temperature capable DC-DC converter with a high voltage range, a wide output current range, and a wide temperature operating range. This helps to provide reliable power conversion for sensitive electronic systems, such as those found in aerospace and other application fields. The VE-JVM-MZ converter is capable of delivering up to 500 watts of power with a conversion efficiency that reaches up to 97%. The converter can be used to convert a supply voltage of up to 200 volts DC to a range of output voltages that range from 0.025V to 30V. The converter can be used with any AC, DC, or pulse-width modulated (PWM) power supplies.
The working principle of the VE-JVM-MZ converter is based on a full-bridge boost topology. This architecture uses two series-connected MOSFET switches that are driven by two oppositely-phased PWM signals generated by a dedicated microcontroller. The two series MOSFETs are connected to the input voltage source and then switched alternately at a certain frequency. The input voltage is then sampled and compared with the desired output voltage by a control circuit. A pulse width modulated signal is then generated to control the two series MOSFETs, so that the input voltage is boosted to the desired output voltage.
The VE-JVM-MZ DC-DC converter is designed to operate in a range of temperatures from -40°C to +105°C, making it suitable for a wide range of applications. The converter is also protected against extreme current surges and is equipped with overvoltage and overcurrent protection. This makes the VE-JVM-MZ converter suitable for a variety of applications, from automotive and industrial to aerospace and medical.
The VE-JVM-MZ DC-DC converter is a reliable, high-temperature capable power conversion solution for a range of applications. Its wide range of output voltages and its ability to operate in extreme temperature conditions make it suitable for a wide range of applications. Its boost topology ensures high energy conversion efficiency and long-term reliability. Its various protections ensure safety and stability for the converter and the application system.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...