VE-JW2-IY-F4

Current - Output (Max):	3.33A
Base Part Number:	VE-JW2
Size / Dimension:	2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm)
Package / Case:	Half Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-40°C ~ 100°C
Features:	OCP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	50W
Series:	VE-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	15V
Voltage - Input (Max):	36V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC Converters

DC-DC converters, also known as DC-DC power supplies, are electrical devices that convert an input voltage level to one more suitable for a specific kind of electrical application. A DC-DC converter designed for the VE-JW2-IY-F4 application field is a type of circuit that provides isolated power conversion between input and output. This type of power supply is typically used in applications where safety is a key priority, such as consumer electronics, instrumentation, or medical technology.The VE-JW2-IY-F4 DC-DC converter is an isolated DC-DC switching regulator which uses a forward-converter topology. It is based around a primary side consisting of a full bridge rectifier diode and high frequency transformer, and a secondary side consisting of an active switching element, output diode, and low pass filter. It is capable of operating over a wide input voltage range, which makes it an excellent choice for applications that require both low voltage and high voltage levels.The VE-JW2-IY-F4 DC-DC converter is designed to provide an isolated power conversion between input and output, with very low power loss. This is accomplished by using a high-frequency AC signal as the input voltage, which is isolated from the output voltage. The AC signal is rectified and filtered on the primary side, and then applied to a high-frequency resonant transformer. The resonance of the transformer causes an AC signal which replicates the input voltage, but with an amplitude slightly higher than the input. This high frequency AC signal is then sent to the secondary side, where it is rectified and filtered again to provide the desired output voltage.The VE-JW2-IY-F4 DC-DC converter can also provide protection from overvoltage and overcurrent by the addition of a few external components. These components are typically connected in series to the main power supply, and work by monitoring the magnitude of the input voltage. If the voltage exceeds a preset value, the overvoltage protection component will shut down the converter and protect against potential damage caused by an excessive input voltage. Similarly, an overcurrent protection component is capable of sensing the output current of the converter and shutting it down if the current exceeds a preset limit.Overall, the VE-JW2-IY-F4 DC-DC converter is an ideal solution for applications which require both low voltage and high-voltage capability, as well as isolated power conversion with minimal power loss. Its flexible design also makes it a great choice for applications requiring protection from overvoltage and/or overcurrent.

The specific data is subject to PDF, and the above content is for reference