VE-JWF-CW-F2

Current - Output (Max):	1.39A
Base Part Number:	VE-JWF
Size / Dimension:	2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm)
Package / Case:	Half Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-25°C ~ 100°C
Features:	OCP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	100W
Series:	VE-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	72V
Voltage - Input (Max):	36V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters are a type of electrical converter designed to convert direct current (DC) electrical power from one voltage level to another. They are particularly used to convert power from high-voltage levels (such as the mains voltage or motor voltage) to low-voltage levels (such as for use in electronic applications). They are one of the most widely used electrical components, especially in the industrial and automotive industries.The VE-JWF-CW-F2 is a type of DC DC converter which is designed for use in industrial and automotive applications. It is designed for conversion of high-voltage DC currents (such as the mains voltage or motor voltage) into low-voltage DC currents (such as for use in electronic applications). The VE-JWF-CW-F2 uses switchmode technology to achieve greater efficiency than traditional linear regulators.The VE-JWF-CW-F2 has a range of features that make it ideal for use in industrial and automotive applications. It is robust and reliable, with a wide operating temperature range of -40°C to +85°C. It also has high efficiency of up to 95 percent, which results in less power wasted and so lower running costs. The converter also supports a range of input and output voltages, so it can be used with different voltage sources.The working principle of the VE-JWF-CW-F2 is quite simple. It takes high-voltage DC current from the input source and converts it to lower-voltage DC current using a control circuit. This control circuit is based on a switching transistor, which switches on and off rapidly. When the transistor is switched on, it short-circuits the input voltage to ground, thus allowing the current to flow through. When the transistor is switched off, the current is blocked, allowing the input voltage to rise. This process is repeated rapidly, and the resulting output voltage is proportional to the frequency with which the transistor is switched on and off. The frequency of the switch is controlled by the control circuit.The VE-JWF-CW-F2 is an ideal DC DC converter for a variety of applications, including those in industrial and automotive areas. It offers high efficiency, robustness and reliability, as well as a wide operating temperature range, making it suitable for use in a variety of applications.

The specific data is subject to PDF, and the above content is for reference