Allicdata Part #: | VE-JWH-MX-S-ND |
Manufacturer Part#: |
VE-JWH-MX-S |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 52V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 52V 1.... |
DataSheet: | VE-JWH-MX-S Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 1.44A |
Base Part Number: | VE-JWH |
Size / Dimension: | 2.28" L x 1.80" W x 0.52" H (57.9mm x 45.7mm x 13.2mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 52V |
Voltage - Input (Max): | 36V |
Voltage - Input (Min): | 18V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters or DC to DC converters are electrical circuits that convert a direct current (DC) power supply to a different DC voltage. These devices are employed in a range of applications, from small telecom equipment to high-power interconnects for satellites. The purpose of using any DC DC converter is to provide a convenient match between high-voltage and low-voltage components. Some of the most common types of DC to DC converters are:
VE-JWH-MX-S: This type of DC DC converter employs voltage-control variable buck-boost topology. The voltage-control variable buck-boost topology enables the device to alter output voltage depending on the output load. In addition, it has high accuracy, low power dissipated in the output circuit and a wide input voltage range.
The basic principle of operation behind a VE-JWH-MX-S DC DC converter is as follows: The input voltage is converted into a current, which is then regulated by the voltage-control variable buck-boost topology. This regulated current is then passed through a transformer to produce the output voltage. The output voltage is adjusted depending on the load imposed on the converter. This method is commonly used to convert lower voltages into higher voltages, or vice versa.
VE-JWH-MX-S DC DC converters are primarily used in applications requiring high accuracy, low power consumption, and wide input voltage range requirements. Some of the common applications where they are used are power supplies for electronic calculators, electronic test and measurement systems, and even satellite interconnects. Furthermore, these converters are widely used in powering off-grid renewable energy systems such as solar and wind.
In summary, VE-JWH-MX-S DC DC converters are voltage regulation devices using the voltage-control variable buck-boost topology. These devices are primarily used in applications demanding high accuracy, low power consumption, and wide input voltage range requirements. The basic principle of operation behind a VE-JWH-MX-S DC DC converter is as follows: The input voltage is converted into a current, which is then regulated by the voltage-control variable buck-boost topology before being passed through a transformer to produce the output voltage. VE-JWH-MX-S converters are widely used in powering off-grid renewable energy systems such as solar and wind, apart from electronic test and measurement systems, calculators, and satellite interconnects.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...