VG-1201CA 27.0000M-TANC3 Crystals, Oscillators, Resonators

Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	12mA
Height - Seated (Max):	0.059" (1.50mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	25mA
Operating Temperature:	-20°C ~ 70°C
Absolute Pull Range (APR):	--
Series:	VG-1201CA
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Enable/Disable
Frequency:	27MHz
Type:	VCXO
Base Resonator:	Crystal
Part Status:	Obsolete
Packaging:	Digi-Reel®

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators: Introduction to VG-1201CA 27.0000M-TANC3

An oscillator is an electronic circuit which generates a continuous output. The output of an oscillator can be either a sine wave, a square wave, or a pulse waveform. VG-1201CA 27.0000M-TANC3 is one type of oscillator that is widely used in a number of applications. This article will explain the application fields and working principle of the VG-1201CA 27.0000M-TANC3 oscillator.

Application Fields

VG-1201CA 27.0000M-TANC3 oscillators are widely used in telecommunication applications and for low frequency signal generation. They are also utilized in medical devices such as pacemakers, as well as in machine control systems, pulse generators, and various other electronics applications. VG-1201CA 27.0000M-TANC3 oscillators can be used in Designs requiring a low jitter, low phase noise, wide frequency range, and high stability performance. These oscillators have a wide input frequency range of 10Hz to over 27MHz, and are usually applied when low jitter and low phase noise signals are needed for synchronized signal generation. These oscillators are ideal for RF communication systems, such as WiFi and cellular networks, as well as for satellite communications.

Working Principle

VG-1201CA 27.0000M-TANC3 oscillators are voltage-controlled oscillators that use a quartz crystal as the frequency determining element. The crystal is connected between the base and the emitter of a transistor, and the resonance frequency is determined by the capacitance between the electrodes and the quality of the quartz crystal. A voltage signal is applied to the transistor\'s base to vary the frequency. The frequency output of the oscillator is dependant on the transistor\'s gain, the frequency of the input signal, and the magnitude of the voltage signal. VG-1201CA 27.0000M-TANC3 oscillators also use an additional circuit, called a loop filter, to reduce unwanted noise. This loop filter is connected to the transistor\'s collector, and uses the feedback from the output to reduce any unwanted noise or jitter.

Conclusion

VG-1201CA 27.0000M-TANC3 voltage-controlled oscillators are widely used in a variety of telecommunication and medical applications. They are used for signal synchronization and synchronization, and can produce signals with low jitter and low phase noise. The VG-1201CA 27.0000M-TANC3 oscillator uses a quartz crystal and a loop filter to reduce noise, and a voltage signal for frequency control.

The specific data is subject to PDF, and the above content is for reference