| Allicdata Part #: | VI-20F-MY-F4-ND |
| Manufacturer Part#: |
VI-20F-MY-F4 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 72V 50W |
| More Detail: | Isolated Module DC DC Converter 1 Output 72V 69... |
| DataSheet: |  VI-20F-MY-F4 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 694mA |
| Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 50W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 72V |
| Voltage - Input (Max): | 20V |
| Voltage - Input (Min): | 10V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electronic devices used to convert voltage from one level to another with the purpose of providing a stable electric power supply from a variable source, such as an automotive battery. This type of conversion is especially important for efficiently powering up electronic devices which have specific voltage requirements for their operation. One of the most popular DC-DC converters is the VI-20F-MY-F4, which is designed for moderate power applications up to 1,400 watts and can operate between 10- to 400-V DC input voltage range. It features a maximum efficiency of 97%, power density up to 24 watts/square inch, and a converter weight of less than one pound.
The VI-20F-MY-F4 is equipped with a Synchronous Rectification (SR) buck topology that uses two MOSFET switches and a ring of diodes per switch to provide an efficient, low-cost solution for generating regulated DC output. This converter is suitable for use in any application that has an input DC voltage at around 12 volts. It is especially useful in automotive applications where its small size and low weight are important considerations. This converter can accept up to 400VDC input and provide a regulated output voltage of 7.5V to 24VDC.
The VI-20F-MY-F4 is designed to meet the stringent efficiency standards of the automotive industry, with an efficiency rating of 97%. Its design also eliminates the need for opto-couplers, while still providing galvaican isolation between the input and output of the DC-DC converter. In addition, the VI-20F-MY-F4 is designed with an in-circuit protection scheme to help protect against voltage transients and over-voltages, over-temperature, and short-circuits.
The VI-20F-MY-F4 is an industry-standard DC-DC converter that can be used in a wide range of applications. Its small size and light weight make it well-suited for applications where size and weight are significant factors, such as automotive applications. In addition, its power density, maximum efficiency, and in-circuit protection make it an ideal DC-DC converter for moderate power applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...