VI-20M-CY-F4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC/DC converters are electrical circuits used for converting a voltage amount from one level to another. They are typically used to either increase or reduce the input voltage in order to power different electrical components. In this article, we will look at the application field and working principle of VI-20M-CY-F4, one type of DC/DC converter.

VI-20M-CY-F4 is an integrated circuit switch mode DC/DC converter with an input voltage range of 1.7 to 5.5V and an output voltage range of 0.8 to 1.25V. It has a full load efficiency of up to 94%, making it among the most efficient converters available in the market today. The device is ideal for small handheld and portable devices that need a high efficiency but low power conversion.

The main application field of the VI-20M-CY-F4 is in the industrial, telecom, and networking areas. In these areas, it can be used to power a variety of devices such as Electronic Control Unit (ECUs), microcontrollers (MCUs) peripherals, FPGAs, LEDs, as well as for power conditioning or noise filtering.

The working principle of the VI-20M-CY-F4 is that of a switched-mode power supply (SMPS). In this type of power conversion technique, the input voltage is switched on and off at a high frequency, resulting in much higher efficiencies than those achieved with traditional linear regulators. The power conversion is done using a power transistor, a filter inductor and a diode, which act together to convert the input voltage to the desired output voltage.

The main components of the VI-20M-CY-F4 are the power MOSFET (Metal Oxide Semiconductor Field Effect Transistor), buck inductors, output filter, and control circuits. The power MOSFET connects to the input and output of the converter and acts as a switch. It is the job of the MOSFET to turn the power on and off as needed. The buck inductors provide the inductive load and are used to reduce the ripple voltage from the square-wave voltage generated by the control circuit. The output filter is also connected to the output and its job is to reduce and filter out any remaining voltage noise. Finally, the control circuit manages and regulates the whole power conversion process.

The VI-20M-CY-F4 DC/DC converter is an excellent choice for those looking for a high efficiency and low power solution. Its wide input voltage range, superior full load efficiency, and versatile application field make it an ideal solution for a wide variety of applications. The working principle of the device is based on the switched-mode power supply technique, which provides highly efficient power conversion while keeping the wattage dissipation to the minimum.

The specific data is subject to PDF, and the above content is for reference