Allicdata Part #: | VI-20V-MY-F2-ND |
Manufacturer Part#: |
VI-20V-MY-F2 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5.8V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 5.8V 8... |
DataSheet: | VI-20V-MY-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | VI-200™ |
Packaging: | Bulk |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 1 |
Voltage - Input (Min): | 10V |
Voltage - Input (Max): | 20V |
Voltage - Output 1: | 5.8V |
Voltage - Output 2: | -- |
Voltage - Output 3: | -- |
Current - Output (Max): | 8.62A |
Power (Watts): | 50W |
Voltage - Isolation: | 3kV |
Applications: | ITE (Commercial) |
Features: | OCP, OTP, OVP, SCP |
Operating Temperature: | -55°C ~ 85°C |
Efficiency: | 90% |
Mounting Type: | Through Hole |
Package / Case: | Full Brick |
Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters enable the conversion of electrical energy from one DC voltage level to another. The VI-20V-MY-F2 is a DC DC converter capable of turning high-voltage DC power into low-voltage DC power. It offers a wide range of applications, from powering small electronic devices to running large industrial machines.
The VI-20V-MY-F2 is designed to handle high input voltages of up to 20V and provides a single output voltage of either 2V, 4V, 6V, 8V, 10V, 12V, 14V or 16V. It features excellent efficiency, with a maximum efficiency of over 96%, ensuring that the power consumed from the input is minimized. It also has a low ripple noise, ensuring that it can provide clean and stable power for sensitive electronic circuitry. The VI-20V-MY-F2 is equipped with over-temperature, over-current and over-voltage protection, helping to keep it safe under various operating conditions.
The VI-20V-MY-F2 employs Buck-Conversion technology to convert power from its high input voltage to a lower output voltage. It works by passing an alternating current through a set of semiconductors that form three distinct circuits known as an H-bridge. The H-bridge rectifies the alternating current and then filters it to a smooth DC signal. This DC signal is then passed through a series of transistors, which regulate the current and voltage of the output signal. The output of the Buck converter is a low-voltage DC signal at the level specified by the user.
The VI-20V-MY-F2 is an industry standard DC-DC converter and is used for a variety of applications. It is commonly used in industrial and commercial settings, such as powering process control equipment and powering security systems, as well as in consumer electronics, such as laptops, tablets, phones, and other mobile devices. It also finds use in automotive applications, such as charging electric vehicle batteries and powering portable electronic devices.
The VI-20V-MY-F2 is an excellent choice for any application where a highly efficient, reliable and safe DC-DC converter is needed. Its wide range of input and output voltages and its high efficiency make it a popular choice among both commercial and industrial users. With its advanced protection features, it is also a great choice for applications where safety is of paramount importance.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...