VI-211-EW

Current - Output (Max):	8.33A
Size / Dimension:	4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	88%
Operating Temperature:	-10°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	100W
Series:	VI-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	12V
Voltage - Input (Max):	32V
Voltage - Input (Min):	21V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

VI-211-EW DC DC ConvertersDC DC converters are versatile tools used in a variety of settings. They facilitate the conversion of electrical energy from one form to another, allowing a device to be powered from a power source which is often different from the one it would normally require. The VI-211-EW DC DC converter is one such device used in a range of different scenarios, many of which require the direct conversion of power from either DC or AC sources. The VI-211-EW converter has a number of applications, and the operations of these applications are fairly simple. Generally, the VI-211-EW converter is used in cases where DC voltage sources need to be converted to AC voltage sources. This can be achieved by connecting one or more VI-211-EW converters to the output of the DC voltage source. These converters are able to handle up to 1.2 kW of power from the DC voltage source, resulting in a maximum of 120VAC output voltage. Additionally, the VI-211-EW converter can be used to convert AC voltage sources into DC voltage sources. Here, two VI-211-EW converters are involved. The first converts the AC voltage source into an intermediate DC voltage, and the second converter turns the intermediate DC voltage into the required DC voltage output. This setup can provide results of up to 12V DC at 1.5 kW of power. Another application for the VI-211-EW converter is seen in the conversion of two or more DC voltage sources into one DC voltage source. Here, two separate VI-211-EW converters are used in a series, each following the same basic process as the single unit used in the first application. This setup can be used to provide an output voltage range of between 0 and 10V, with a maximum power level of 1.5 kW. The working principle of the VI-211-EW converters is fairly straightforward. The device utilizes a simple circuit of rectification, inversion, and buck-boost transformer to provide the desired output voltage. In rectification, AC voltage is converted into DC voltage, while inversion is used to convert a DC voltage into an AC voltage. Finally, buck-boost transformers are used to boost and/or reduce the voltage as needed. This process is performed at a high frequency of up to 200kHz, resulting in a smooth and consistent output voltage. In conclusion, the VI-211-EW DC DC converter is a versatile device used in a number of different applications. This converter is able to convert voltage sources progressively from DC to AC, AC to DC, and even combining two or more DC voltage sources into one. Its working principle is fairly simple, involving the use of rectification, inversion, and buck-boost transformers at a high frequency for consistent output voltage.

The specific data is subject to PDF, and the above content is for reference