VI-21T-MW-F2 Power Supplies - Board Mount |
|
| Allicdata Part #: | VI-21T-MW-F2-ND |
| Manufacturer Part#: |
VI-21T-MW-F2 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 6.5V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 6.5V 1... |
| DataSheet: |  VI-21T-MW-F2 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 15.38A |
| Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 6.5V |
| Voltage - Input (Max): | 32V |
| Voltage - Input (Min): | 21V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electrical components used to convert direct current (DC) from a source to a specific output voltage. One example of a DC-DC converter is the VI-21T-MW-F2. The VI-21T-MW-F2 converter is designed for small, low-power applications such as battery operated computers, medical equipment, and consumer electronics. It is an ideal choice for applications that require high efficiency and space-saving.
The VI-21T-MW-F2 is a single-output, booster/inverting DC-DC converter with operating voltage range of 1.5V to 5.5V. It features a maximum output current of 1A, and a maximum input of 20V. It also has a low quiescent current consumption of only 200uA. In addition, the VI-21T-MW-F2 converter has a built-in short circuit protection and thermal shutdown to avoid potential damage to the device due to an overload or overheating.
The VI-21T-MW-F2 converter is mainly used in portable/mobile applications such as battery-powered computers. In these applications, the device is used to convert the battery voltage into the required voltage for the system. Additionally, the VI-21T-MW-F2 converter can also be used for a wide range of other applications such as medical equipment, consumer electronic devices, and many others.
The VI-21T-MW-F2 DC-DC converter works on the principle of pulse width modulation (PWM). The circuit contains two power MOSFETs connected in back-to-back configuration that switch alternately at a given frequency. The duty cycle of the PWM signal is modulated to achieve the desired output voltage. The devices also feature a voltage feedback loop that helps maintain a stable output voltage. The output voltage of the device can be adjusted by varying the duty cycle of the PWM signal.
The VI-21T-MW-F2 converter is an efficient and reliable device that can be used to provide multiple output voltages from a single input voltage. It has a high efficiency and low quiescent current, making it suitable for a variety of applications. Additionally, its small size makes it a great choice for space saving.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...