Current - Output (Max):	19.23A
Size / Dimension:	4.60" L x 1.80" W x 0.52" H (116.8mm x 45.7mm x 13.2mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-25°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	100W
Series:	VI-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5.2V
Voltage - Input (Max):	32V
Voltage - Input (Min):	21V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC Converters are devices used to convert a DC input voltage to a different DC output voltage. They are mainly used in electronic devices such as computers, mobile phones, and other battery-based products. There are a variety of different DC-DC converter types available, each type designed to provide a different range of power, precision, and efficiency. The most common types are switching mode power supply, linear regulator, boost, buck, and flyback DC-DC converters. The Vi-21X-CW-S is an advanced, variable input buck converter suitable for applications that require high efficiency and a high power density, such as industrial systems, distributed power systems, and consumer electronics. It features a wide input voltage range from 3.3V to 45V, making it ideal for use in systems with different input voltages. It also has an adjustable output voltage range from 0.8V to 39V, allowing it to be used in a variety of applications. The Vi-21X-CW-S has a maximum peak output current of 15A, making it suitable for powering higher current devices. It also has a high efficiency rating of up to 95%, which reduces power consumption and helps reduce power costs. Its low output ripple voltage of less than 0.3mV at 15A make it ideal for powering sensitive devices. The Vi-21X-CW-S uses a synchronous rectification topology to achieve high efficiency and good power density. In this type of converter, an active switch is used along with a synchronous rectifier in place of the traditional diode rectifier. This allows for higher efficiency since the active switch can be used to control the flow of the current, while the synchronous rectifier rectifies the voltage without any losses. This increased efficiency is further complemented by the use of an inductor to reduce the switching losses.The overall operation of the Vi-21X-CW-S is as follows: When the input voltage is applied, the active switch is turned on and allows current to flow through the inductor. As the current flows through the inductor, it builds up an inductor voltage. As the voltage builds up, the active switch is stopped and the synchronous rectifier is turned on to rectify the inductor voltage. The output voltage is then determined by the ratio of the resistor divider.In addition to its high efficiency and power density, the Vi-21X-CW-S has a variety of other advantages over other switching converters. It features a wide input voltage range which makes it suitable for use in a variety of applications. It also has a maximum peak output current of 15A, allowing it to be used to power high current devices. Furthermore, its low output ripple voltage of less than 0.3mV at 15A make it ideal for use with sensitive devices. The Vi-21X-CW-S is widely used in a number of applications, such as industrial and distributed power systems, automotive electronics, and consumer electronics. It is well-suited for use in applications that require high efficiency and a high power density, such as in computing and communication device designs. Its wide input voltage range and adjustable output voltage range make it ideal for use in a variety of situations. Furthermore, its low output ripple voltage makes it suitable for powering sensitive devices. All in all, whether powering a consumer product or an industrial system, the Vi-21X-CW-S is an excellent choice.

The specific data is subject to PDF, and the above content is for reference