VI-23J-MY-S

Current - Output (Max):	1.39A
Size / Dimension:	4.60" L x 1.80" W x 0.52" H (116.8mm x 45.7mm x 13.2mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-55°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	50W
Series:	VI-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	36V
Voltage - Input (Max):	60V
Voltage - Input (Min):	42V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters are widely used in the electronic market, as they allow a higher-voltage current to be converted into a lower-voltage current. One of the more popular DC/DC converters is the VI-23J-MY-S. This converter is designed to convert a voltage of 230VDC into a voltage of -48VDC.The VI-23J-MY-S is a non-isolated DC/DC converter, meaning that it does not need external circuit isolation. Instead, it relies on the electrical isolation formed from the capacitive coupling of the integrated inductors. This makes the VI-23J-MY-S ideal for applications where space is limited due to its low profile. In addition, it has a low power consumption, making it a cost-effective solution for a variety of electrical engineering applications.The core of the VI-23J-MY-S is a board-mounted, closed-loop voltage regulator. This is a type of power management circuit that is designed to maintain a constant output voltage, despite changes in the input voltage. It uses feedback signals from the output voltage to control the amount of power supplied to the load. This helps to ensure that the output voltage is always at the desired level.The principal of operation is known as ‘Flyback-Mode’, wherein an input capacitor is connected to the main filter capacitor, which is then connected to an output capacitor. When a voltage is applied to the input capacitor, a small amount of current is diverted to the filter capacitor, causing a current to flow in the reverse-voltage direction. This reversed current is then used to charge the output capacitor. As the output capacitor is charged, the output voltage increases. When the output voltage crosses a threshold level, the feedback signal is used to reduce the current to the filter capacitor, and thus stop the output voltage from increasing. In this way, the output voltage is automatically maintained at the desired level.The VI-23J-MY-S is an efficient and reliable converter that is suitable for a wide range of applications. It can handle both DC and AC inputs, allowing it to be used in a variety of environments where there is a need to convert higher voltages into lower voltages. Some of the major applications include electric vehicles, portable electronic devices, power supplies, test and measurement equipment, industrial automation equipment, and medical devices.The VI-23J-MY-S is also designed for long-term use and is a reliable piece of equipment. With its low power consumption and efficient operation, it is capable of providing a constant voltage output over long periods of time, and can be relied upon to meet the demands of a wide range of applications.

The specific data is subject to PDF, and the above content is for reference