| Allicdata Part #: | VI-23X-IX-B1-ND |
| Manufacturer Part#: |
VI-23X-IX-B1 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 5.2V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 5.2V 1... |
| DataSheet: |  VI-23X-IX-B1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 14.42A |
| Size / Dimension: | 4.60" L x 2.40" W x 1.07" H (116.8mm x 61.0mm x 27.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -40°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 5.2V |
| Voltage - Input (Max): | 60V |
| Voltage - Input (Min): | 42V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are electronic devices used to convert direct current (DC) from one voltage level to another. The VI-23X-IX-B1 is a type of DC DC converter that enables voltage conversion from intermediate levels to higher, lower, or unregulated levels. This converter is widely used to power many automotive, industrial, and consumer applications.
The VI-23X-IX-B1 is a full-featured, high-performance converter that provides a total power output of up to 90 watts. It is capable of outputting variable levels from 1.2V to 28V and is rated for over-voltage protection. Additionally, it has an efficiency rating of up to 95%, making it one of the most efficient DC DC converters available.
The VI-23X-IX-B1 can be used in a wide range of applications, including automotive, industrial, telecommunication, and consumer electronics. It is ideal for providing power for components such as sensors, transceivers, drives, motors, and regulators. Additionally, it is suitable for applications where precise power delivery is necessary, as it is able to provide conduction-mode and pulse-width modulation.
The VI-23X-IX-B1’s working principle is based on the buck-converter topology. This topology uses a switching device to switch the voltage from its input to its output. The switching device is usually an insulated gate bipolar transistor (IGBT) or a power MOSFET. As the device switches from the input to the output voltage, the switching losses are minimized.
In addition, the converter uses an LC filter to eliminate harmonic distortion caused by switching transients. The LC filter contains an inductor and a capacitor to filter out high-frequency noise. The output voltage is regulated by an adjustable voltage reference, which can be adjusted as needed for the required load.
The VI-23X-IX-B1 can be used in many different types of applications due to its flexibility and high efficiency. It is ideal for providing power for a wide range of components, from sensors and transceivers to drives and motors. Additionally, the adjustable voltage reference allows for accurate power delivery and reliable operation. Overall, the VI-23X-IX-B1 is an excellent DC DC converter that can be used in a variety of applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...