| Allicdata Part #: | VI-241-IW-F1-ND |
| Manufacturer Part#: |
VI-241-IW-F1 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 12V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 12V 8.... |
| DataSheet: |  VI-241-IW-F1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 8.33A |
| Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -40°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 12V |
| Voltage - Input (Max): | 100V |
| Voltage - Input (Min): | 55V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
DC DC converters allow a direct current (DC) to be converted to a different voltage range of the same type. There is a large variety of DC-DC converter designs, and they come in many forms and sizes, from very small, low-power units to multi-megawatt components. A DC DC converter can be used for a variety of applications, depending on the desired output voltage, current, and efficiency.
VI-241-IW-F1 Application Field and Working Principle
The VI-241-IW-F1 DC to DC converter is used in a variety of applications, such as computer power supplies and solar panel controllers. It is a high efficiency, highly regulated converter that can accept input voltages from 6V to 32V, and output up to 24V with a current of up to 10A.
The VI-241-IW-F1 is a synchronous step-down converter. This means that it uses two switches (an upper switch and a lower switch) connected to the input and output of the converter. When the upper switch is in the “on” state, the current flowing through the input and output is greater than when the upper switch is in the “off” state. This creates an increase in the output voltage, which is greater than the input voltage. Conversely, when the lower switch is in the “on” state, the current flowing through the input and output is less than when the lower switch is in the “off” state. This creates a decrease in the output voltage, which is lower than the input voltage.
The VI-241-IW-F1 also features a built-in synchronous rectifier, which reduces conduction losses and increases efficiency. The rectifier is responsible for routing the current in the correct directions during the “on” and “off” cycles of the upper and lower switches.
The VI-241-IW-F1 DC to DC converter can be applied in a wide range of applications, including computer power supplies, mobile power applications, laptop power adapters, automotive systems, consumer electronics, and more. Additionally, it is a flexible device that can accept input voltages ranging from 6V to 32V, and output up to 24V, with a maximum current rating of 10A.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...