| Allicdata Part #: | VI-24M-MY-F2-ND |
| Manufacturer Part#: |
VI-24M-MY-F2 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 10V 50W |
| More Detail: | Isolated Module DC DC Converter 1 Output 10V 5A... |
| DataSheet: |  VI-24M-MY-F2 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 5A |
| Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 50W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 10V |
| Voltage - Input (Max): | 100V |
| Voltage - Input (Min): | 55V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are devices that convert direct currents (DC) from one voltage level to another. They are widely used in both consumer electronics and in industrial electronics applications. The VI-24M-MY-F2 DC-DC converter is a high-performance module that can be used in a variety of applications. In this article, we will look at the application fields and working principle of the VI-24M-MY-F2 DC-DC converter.
Application Fields
The VI-24M-MY-F2 DC-DC converter can be used in a wide range of applications. These include powering embedded Pololu motor drivers, generating motor voltage from a laptop power adapter, providing charging voltage for Li-Ion batteries, and more. It is also suitable for use in low power applications such as Raspberry Pis and Arduino boards.
Working Principle
The VI-24M-MY-F2 DC-DC converter works by converting an input DC voltage of 12V or 24V to 3, 5, 9 and 12V. It can also convert a 12V input to 19V and 1.5V. The output voltage is regulated and is adjustable within the specified range.
The device uses synchronous buck technology to convert electricity. It operates by switching a high-side MOSFET at a high frequency while simultaneously controlling the lower MOSFET until a stable voltage is achieved. The output voltage will remain within the original design parameters, even when the input voltage or the load current changes.
Safety Features
The VI-24M-MY-F2 DC-DC converter has a number of safety features designed to protect itself, as well as the device it is powering. It features overvoltage protection (OVP) and overcurrent protection (OCP). The OVP triggers when the output voltage exceeds its designed limit, while the OCP triggers when the load current is too high. Additionally, the device has short circuit protection (SCP) that triggers when there is a short circuit between the output and ground.
Conclusion
The VI-24M-MY-F2 DC-DC converter is a high-performance device that can be used in a variety of applications. It has a wide input voltage range of 12V to 24V and can output voltages of 3, 5, 9, 12 and 19V. It also has several safety features such as OVP, OCP and SCP that protect the device and its load.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...