| Allicdata Part #: | VI-25T-MX-F3-ND |
| Manufacturer Part#: |
VI-25T-MX-F3 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 6.5V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 6.5V 1... |
| DataSheet: |  VI-25T-MX-F3 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 11.54A |
| Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 6.5V |
| Voltage - Input (Max): | 200V |
| Voltage - Input (Min): | 100V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
The VI-25T-MX-F3 is a direct current (DC) to direct current (DC) converter designed for industrial and commercial applications. This unit is rated for 25kW of power and has a high efficiency of up to 95%. It is based on a boost converter circuit with a switching frequency of 130kHz.
Application Field
The VI-25T-MX-F3 is suitable for a variety of applications, including power supplies for industrial and commercial use, frequency converters, LED lighting, electric vehicle charging and solar power. The wide input and output voltage ranges make it suitable for a broad range of applications. It is highly efficient and has a wide temperature range of -40°C to +85°C.
Working Principle
The VI-25T-MX-F3 is based on a boost converter circuit. This kind of converter takes a DC input voltage and increases it by using an inductor and a switch. The switch is opened and closed at a frequency of 130kHz, which causes current to flow through the inductor. The inductor stores energy in a magnetic field, which is then increased in voltage and fed to the output of the converter. The output voltage can be adjusted by adjusting the duty cycle of the switch.
The VI-25T-MX-F3 also incorporates various protection features, including on/off control, overcurrent protection and protection against over-voltage and under-voltage. This makes it an ideal solution for a variety of industrial and commercial applications where a robust and reliable power supply is needed.
Conclusion
The VI-25T-MX-F3 is a high-efficiency direct current (DC) to direct current (DC) converter designed for use in a variety of industrial and commercial applications. Its wide range of input and output voltages make it suitable for a broad range of applications. It is highly efficient and provides excellent protection features. This makes it an ideal solution for a variety of uses where a reliable and robust power supply is needed.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...