Allicdata Part #: | VI-25V-CV-F3-ND |
Manufacturer Part#: |
VI-25V-CV-F3 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5.8V 150W |
More Detail: | Isolated Module DC DC Converter 1 Output 5.8V 2... |
DataSheet: | VI-25V-CV-F3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 25.86A |
Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 150W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 5.8V |
Voltage - Input (Max): | 200V |
Voltage - Input (Min): | 100V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are essential for managing power flows in electronic devices. Often, they are used to provide the needed voltage for optimal performance of a device. DC-DC converters can provide voltage conversion from the input to the output, and can be configured to step up or step down, depending on the application. They provide a high level of efficiency and are highly reliable. One such type of DC-DC converter is the VI-25V-CV-F3.
The VI-25V-CV-F3 is a high-efficiency, low power consumption dc-dc converter used for voltage step-up or step-down applications. It provides up to 25 volts of output voltage (adjustable) with a maximum current of 5 amps. It is capable of providing a wide range of output voltages, with an efficiency of up to 99% and a maximum power output of 50W. It has a wide input voltage range of 6-35V and a low no-load power consumption of 0.03W. It is designed with overvoltage and overtemperature protection, as well as short circuit protection, and has a 100,000-hour MTBF value.
The VI-25V-CV-F3 has many potential applications. Although it is primarily intended for step-up or step-down voltage conversion, it can also be used for power management, DC/DC regulation, high-voltage generation, voltage feedback and control, or even to increase the current flow in power supplies. It is commonly used in industrial, automotive, LED lighting, and other industrial applications.
The working principle behind the VI-25V-CV-F3 is relatively simple yet highly efficient. It is a switched-mode power supply that works by converting input voltage to a higher or lower output voltage, depending on the application. It uses the switch mode technique to rapidly modulate the duty cycle of an oscillator, which generates a pulse-width modulation (PWM) signal. This signal is transmitted to an output stage, in which a power transistor is used to turn the energy stored in an inductor or capacitor into output voltage. The PWM waveform is also used to drive various control and protection circuits.
The VI-25V-CV-F3 has a wide range of applications, is highly efficient, and has a low power consumption with a long MTBF value. Its relatively simple working principle also proves to be highly useful in a variety of applications. All of these features make it a great choice for DC-DC voltage conversion.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...