Allicdata Part #: | VI-25V-CY-F4-ND |
Manufacturer Part#: |
VI-25V-CY-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5.8V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 5.8V 8... |
DataSheet: | VI-25V-CY-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 8.62A |
Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 50W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 5.8V |
Voltage - Input (Max): | 200V |
Voltage - Input (Min): | 100V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters provide a crucial component for a wide range of modern electrical and electronic systems. The VI-25V-CY-F4 is one such unit, offering small size and low weight for excellent portability. It offers power density and efficiency levels that make it an excellent choice for a variety of DC-DC conversion applications.
The VI-25V-CY-F4 operates in a wide range of input and output voltages. It is rated for an input voltage range of 24 to 30 volts DC, with an output voltage of 4.00V to 25V DC. Its maximum current rating per output is 5.00A. The unit provides a constant, full-load efficiency of 94%. The VI-25V-CY-F4 also features a low current standby mode that consumes less than 3mA. Additionally, it is protected against short circuit conditions via a high-side current limiting circuit with automatic recovery.
The VI-25V-CY-F4 is a buck-converter, meaning it efficiently reduces the DC input voltage to the desired, lower output voltage. In this DC-DC converter, the output voltage is governed by the magnitude of an applied feedback voltage and is set by the ratio of two resistors. This type of non-isolated converter draws in a constant input current, while the output voltage is regulated through pulse width modulation (PWM).
The high performance of the VI-25V-CY-F4 makes it ideally suited for applications requiring highly efficient and stable voltage conversion. These include powering telecom equipment, wireless infrastructures, microprocessor-based systems and portable or distributed DC power architectures. Industrial process control and embedded systems are yet another application for this unit.
The VI-25V-CY-F4 is an efficient and reliable DC-DC converter. It offers excellent power density and operating efficiency combined with an adjustable, stable output voltage. Additionally, the unit provides protection against short circuit conditions, and its low current standby mode helps to further reduce power consumption. As such, this converter is an excellent choice for a wide range of medium-power DC-DC conversion applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...