Allicdata Part #: | VI-25V-EV-B1-ND |
Manufacturer Part#: |
VI-25V-EV-B1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5.8V 150W |
More Detail: | Isolated Module DC DC Converter 1 Output 5.8V 2... |
DataSheet: | VI-25V-EV-B1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 25.86A |
Size / Dimension: | 4.60" L x 2.40" W x 1.07" H (116.8mm x 61.0mm x 27.1mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 88% |
Operating Temperature: | -10°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 150W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 5.8V |
Voltage - Input (Max): | 200V |
Voltage - Input (Min): | 100V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters have been in use for more than 70 years and have revolutionized the way power is used in many industries. The VI-25V-EV-B1 is one such converter. It is a switch mode power supply designed to convert a voltage level from one range to another, without changing the electrical characteristics of the signal. This article will explain the application field and working principle of the VI-25V-EV-B1 DC-DC converter.
The VI-25V-EV-B1 is generally used in applications that require precise voltage levels, and where efficient power conversion is required. One common application is in small industrial plants, where the converter is required to convert single-phase power to three-phase power. The converter also can be used in battery-powered systems, where the voltage required is less than the battery voltage. The output voltage can be adjusted from zero to 25 volts.
The VI-25V-EV-B1 is a full bridge circuit consisting of two switching MOSFETs, a transformer and a diode bridge for rectifying the AC output voltage. The switching is controlled by a PWM signal, which is generated by a microcontroller and then transmitted to the FETs via opto-couplers. The switching frequency can be adjusted from 20 kHz to 350 kHz, which is critical for applications where noise can be an issue.
The microcontroller monitors the input and output voltage levels with each switching cycle. The MOSFETs are then controlled to change the duty cycle of the PWM signal, in order to maintain the desired output voltage. This feedback control ensures the output voltage is always stable and at the desired level, and minimizes voltage fluctuations due to changes in the load or external factors.
The VI-25V-EV-B1 converter has a high efficiency of over 85%, which makes it well suited for use in energy efficient applications. The transformer and MOSFETS are highly efficient, allowing them to operate at high frequencies with minimal loss. The transformer also features soft switching, which reduces electromagnetic interference and helps to retain high efficiency levels even at low load currents.
The VI-25V-EV-B1 DC-DC converter is an ideal solution for applications requiring precise, energy efficient power conversion. The feedback control ensures the output voltage remains stable, and the high efficiency of the converter makes it well suited for applications where energy savings are important. The output voltage can be adjusted from 0 to 25 volts, and the switching frequency can be adjusted from 20 kHz to 350 kHz, allowing for close regulation of voltage levels.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...