| Allicdata Part #: | VI-25V-EV-F2-ND |
| Manufacturer Part#: |
VI-25V-EV-F2 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 5.8V 150W |
| More Detail: | Isolated Module DC DC Converter 1 Output 5.8V 2... |
| DataSheet: |  VI-25V-EV-F2 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 25.86A |
| Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 88% |
| Operating Temperature: | -10°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 150W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 5.8V |
| Voltage - Input (Max): | 200V |
| Voltage - Input (Min): | 100V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are devices that convert one DC power source to another DC power source. The VI-25V-EV-F2 is a type of DC-DC converter. It allows for an input voltage of 5-20Vdc and an adjustable output voltage range of 1.2Vdc to 60Vdc. It is designed to operate at up to 97% efficiency and is ideal for a wide range of industrial, commercial, and laboratory applications.
The VI-25V-EV-F2 has a wide input voltage range, which corresponds to the output voltage range. This allows it to remain efficient while increasing or decreasing the output voltage depending on the load demand. The operating frequency range is adjustable from 180kHz to 500kHz, and it can handle an input power of up to 100W. It has an internal temperature protection and over-voltage protection, and it has a digital power monitor port for remote monitoring and control.
The primary application of the VI-25V-EV-F2 is in the field of renewable energy, such as solar panels, wind turbines, and hydro-power systems. It can be used to connect multiple solar panels in series to maximize energy harvest, or to connect panels to batteries to store energy. It can also be used in fuel cell systems, hybrid electric vehicles, and to power remote sensing systems.
The working principle of the VI-25V-EV-F2 is based on Pulse Width Modulation (PWM) technique. It uses a circuit that takes periodic pulses of voltage and current from the input source and then modulates their width to generate an output signal. By adjusting the pulse widths, the output voltage can be raised or lowered depending on the load demand. In addition, the power is monitored and regulated so that the output is always within the specified limits.
The VI-25V-EV-F2 has a variety of features that make it a great choice for DC-DC converters. It is small and efficient, and is capable of producing output voltages from 1.2Vdc to 60Vdc. Its wide input voltage range and adjustable output frequency range make it suitable for a wide range of applications. Lastly, its internal protection and monitoring features make it safe and reliable in any environment.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...