Allicdata Part #: | VI-25V-EW-B1-ND |
Manufacturer Part#: |
VI-25V-EW-B1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5.8V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 5.8V 1... |
DataSheet: | VI-25V-EW-B1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 17.24A |
Size / Dimension: | 4.60" L x 2.40" W x 1.07" H (116.8mm x 61.0mm x 27.1mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 88% |
Operating Temperature: | -10°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 5.8V |
Voltage - Input (Max): | 200V |
Voltage - Input (Min): | 100V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are electronic devices which convert a direct current (DC) from one voltage level to another. The VI-25V-EW-B1 is a DC DC converter designed to convert an input voltage from 24V to 28V to an output of 25V DC. The VI-25V-EW-B1 offers adjustable output voltage, enabling users to adjust the voltage to the desired settings.
The VI-25V-EW-B1 features a wide temperature range, from -40°C to +85°C. It also has low output ripple, making it suitable for industrial applications. The converter is also equipped with soft-start, over-voltage protection, and current limiting for added safety and protection of the load.
The VI-25V-EW-B1 can be used in a number of applications including LED lighting, car audio systems, embedded systems, and industrial equipment. Its wide temperature range makes it suitable for use in a variety of environments. The low output ripple makes it well-suited for use in audio applications, providing clean, undistorted output.
The VI-25V-EW-B1 is an isolated DC DC converter, meaning it operates with two separate circuits. One circuit is the input which supplies an unregulated DC voltage and the second is the output, which provides a regulated DC output voltage. The VI-25V-EW-B1 uses a switching topology to convert the input voltage to the desired output voltage level.
The VI-25V-EW-B1 has an input voltage of 24 V to 28 V, which is stepped down to the desired output voltage of 25 V. The input voltage is converted to a pulse width modulation signal, which is then filtered by an LC filter to create a square wave output. This square wave output is then rectified by a circuit composed of two synchronously rectifying diodes to create a smooth DC output voltage.
To protect the converter from over-current, an over-current protection circuit is included. This circuit cuts off the output voltage if the current exceeds a set limit. The VI-25V-EW-B1 also has a short-circuit protection circuit to protect the load from over-current.
The VI- 25V-EW-B1 also comes with a soft-start circuit, which prevents large inrush currents. The soft-start prevents the output voltage from going over the set level and causing damage to the components.
The VI-25V-EW-B1 is a reliable and efficient DC DC converter suitable for a variety of applications. With its wide temperature range, low output ripple, adjustable voltage, and protection features, it is well-suited for applications in industrial, automotive, and audio systems.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...