Allicdata Part #: | VI-25V-IV-F3-ND |
Manufacturer Part#: |
VI-25V-IV-F3 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5.8V 150W |
More Detail: | Isolated Module DC DC Converter 1 Output 5.8V 2... |
DataSheet: | VI-25V-IV-F3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 25.86A |
Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 150W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 5.8V |
Voltage - Input (Max): | 200V |
Voltage - Input (Min): | 100V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are used in products which require an efficient conversion of a DC input voltage to another DC voltage greater or lesser than the input voltage and in different power forms. The VI-25V-IV-F3 DC converter is one of the DC converters most commonly used in the electronics industry.
The VI-25V-IV-F3 DC converter is an isolated, high-efficiency DC-DC converter, which boosts input voltage and can provide regulated outputs from 5V-25V. It has an input stage which combines a nosilicon-controlled rectifier (SCR)-based active clamp topology with a normal forward conduction path. The SCR provides low forward conduction losses and the converter can reach high levels of efficiency.
The active clamp topology used in the VI-25V-IV-F3 DC converter allows for wide input voltage and current ranges by automatically switching between current-limit and voltage-regulation modes. The converter uses a power switch to incrementally increase the output voltage, thus allowing for a wide output voltage range.
The VI-25V-IV-F3 DC converter is very simple to setup and use. It has three adjustment pins, one for setting the output voltage and two for setting the output current. By adjusting the pins, the output voltage and current are controlled easily and quickly.
The VI-25V-IV-F3 DC converter is primarily used in applications where an efficient conversion to a DC output voltage is required. These applications can include communication systems, power supplies, motor controllers, industrial, automotive, and renewable energy systems. Its high efficiency, low losses, and simple setup make it an ideal solution for these types of applications.
The VI-25V-IV-F3 DC converter is a highly efficient converter and offers a wide input voltage and current range. It is simple to setup and use, and is ideal for applications where an efficient DC output voltage is required. As such, it is widely used in communication systems, power supplies, motor controllers, industrial, automotive, and renewable energy systems.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...