Allicdata Part #: | VI-25V-MW-ND |
Manufacturer Part#: |
VI-25V-MW |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5.8V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 5.8V 1... |
DataSheet: | VI-25V-MW Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | VI-200™ |
Packaging: | Bulk |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 1 |
Voltage - Input (Min): | 100V |
Voltage - Input (Max): | 200V |
Voltage - Output 1: | 5.8V |
Voltage - Output 2: | -- |
Voltage - Output 3: | -- |
Current - Output (Max): | 17.24A |
Power (Watts): | 100W |
Voltage - Isolation: | 3kV |
Applications: | ITE (Commercial) |
Features: | OCP, OTP, OVP, SCP |
Operating Temperature: | -55°C ~ 85°C |
Efficiency: | 90% |
Mounting Type: | Through Hole |
Package / Case: | Full Brick |
Size / Dimension: | 4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are an important element of any electrical system. They are used to supply power from one source to another, often to apps such as motor drives, AC/DC supplies, and automotive electronics. The VI-25V-MW is a voltage-boosting DC DC converter that uses insulated gate bipolar transistors (IGBTs) as its primary components. This converter is designed for applications such as power supplies, motor controllers, and electric vehicles which require a source of power conversion between two different voltages. In this article, we will discuss the application field and working principle of the VI-25V-MW DC DC converter.
Application Field
Though specific applications may vary, the VI-25V-MW is most commonly used for medium-power applications, such as high-speed motor drives, variable-speed power supplies, and automotive electronics. It is designed to provide highly efficient conversion of direct current (DC) power from one voltage range to another. This is particularly useful for applications like electric vehicles, where there is drift in the original input voltage, making a voltage-boosting converter a necessary component.
Working Principle
The working principle of the VI-25V-MW is relatively simple. It utilizes IGBTs to convert DC power from one voltage range to another. IGBTs are insulated-gate transistors that can conduct both current and voltage. When electric current is applied to the IGBT, it will act as a switch, allowing current to flow from one voltage range to another. The VI-25V-MW works by using two IGBTs in series. One IGBT acts as an inverter, and it converts DC power to alternating current (AC). The second IGBT then acts as an amplifier, increasing the voltage of the AC. This process is repeated until the desired voltage is reached.
To ensure the highest efficiency, the VI-25V-MW is designed to maintain a high switching frequency. This helps to ensure that losses are minimized and the power is converted as efficiently as possible.
The VI-25V-MW also utilizes a number of safety features. An over-current protection circuit will shut down the converter should it be overloaded, and a voltage sensor will monitor the output voltage and shut down the converter if it exceeds the set limit.
In conclusion, the VI-25V-MW is a voltage-boosting DC DC converter that is designed to provide efficient conversion of DC power from one voltage range to another. It is most commonly used for medium-power applications, such as high-speed motor drives, variable-speed power supplies, and automotive electronics. The VI-25V-MW utilizes IGBTs to convert DC power, and is designed with a number of safety features to protect the system from overloading and excessive voltage.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...