Allicdata Part #: | VI-25V-MX-S-ND |
Manufacturer Part#: |
VI-25V-MX-S |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5.8V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 5.8V 1... |
DataSheet: | VI-25V-MX-S Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 12.93A |
Size / Dimension: | 4.60" L x 1.80" W x 0.52" H (116.8mm x 45.7mm x 13.2mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 5.8V |
Voltage - Input (Max): | 200V |
Voltage - Input (Min): | 100V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Dc-dc converters are an important part of industrial and commercial electronics. They allow devices to be powered from a wide variety of sources, from mains power to battery power. The VI-25V-MX-S Dc-dc converter is a highly popular converter used in a wide range of applications. This article describes the application fields and working principle of the VI-25V-MX-S Dc-dc converter.
The VI-25V-MX-S Dc-dc converter is primarily used in applications where power conversion is required between two different DC voltages. It is also used in applications where precise voltage control is required, such as for voltage regulators and LED lighting.
The VI-25V-MX-S is a high-efficiency buck-boost converter with a topology that allows it to step up or step down the voltage without any special components. The converter has a wide input voltage range of 18 V to 72 V and can output a regulated voltage of either 6V to 25V. It also has an adjustable current limit, with a maximum output current of 7.5 A. The converter is also able to provide good EMI performance and has been tested for the compliance of CEC, EN61000 and IECEE requirements.
The VI-25V-MX-S Dc-dc converter is based on the proven buck-boost converter topology. It uses an input voltage that is higher or lower than the output voltage, and is able to regulate it accurately. The basic circuit consists of a switch, inductor and diode, as well as an input and output filter. The switch is usually a MOSFET transistor that is turned on and off at a fixed frequency depending on the control voltages. When it is off, the inductor will ‘store’ energy, and when it is ‘on’ the energy is ‘released’ into the output voltage.
The VI-25V-MX-S is also equipped with many features to make it a more reliable and efficient device. It has multiple protections like over-voltage, over-current and over- temperature protection. It also has a built-in soft start feature, which can reduce the stress on the components when the converter is started. As a result, the VI-25V-MX-S can operate at high power levels with better efficiency.
The VI-25V-MX-S Dc-dc converter is a highly efficient and reliable device and is suitable for a wide range of applications. It is especially useful for applications where precise voltage control is required, such as voltage regulators and LED lighting. Its high input voltage range, good EMI performance and adjustable current limit make it a great choice for many industrial and commercial applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...