| Allicdata Part #: | VI-262-IX-B1-ND |
| Manufacturer Part#: |
VI-262-IX-B1 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 15V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 15V 5A... |
| DataSheet: |  VI-262-IX-B1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 5A |
| Size / Dimension: | 4.60" L x 2.40" W x 1.07" H (116.8mm x 61.0mm x 27.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -40°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 15V |
| Voltage - Input (Max): | 400V |
| Voltage - Input (Min): | 200V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are a type of power supply device that converts electrical energy from a direct current source to a source of alternating current. The VI-262-IX-B1 model is a device used to convert a high voltage direct current (DC) into a low voltage direct current (DC). It is an ideal solution for applications such as battery-operated systems, solar battery charging, telecom power system, ATM machines, etc.
The VI-262-IX-B1 operates utilizing an isolated transformer-based topology. This isolates the input secondary side from the input primary side. This type of topology is beneficial in many applications as it is very reliable and efficient.The device has a wide input voltage range from 11V to 20V, and provides an output voltage of 5V. It also provides an output current of up to 300mA. The VI-262-IX-B1 is a high efficiency and high reliability device, with a minimum standby current rating of 300mA.
The operating principle of the VI-262-IX-B1 is based on the transformer principle. The circuit is designed to convert a high voltage direct current into a low direct current voltage. The output voltage is regulated by varying the duty cycle of the pulse width modulation (PWM) signal, which controls the power on/off cycles of the device. The output voltage is then stepped down to the desired value from the input voltage.
In addition to the basic function of voltage conversion, the VI-262-IX-B1 also provides protection features such as input short circuit protection, output over voltage protection and current limiting. This makes the device particularly useful in applications where safety is a concern.The VI-262-IX-B1 also provides a low radiation immunity, which is suitable for applications with high electromagnetic interference.
The VI-262-IX-B1 is an ideal solution for applications requiring a reliable and efficient DC-DC converter. The device is suited for use in a range of applications, from high-end industrial, telecoms, to consumer, medical, and automotive. Its wide input voltage range and high efficiency make it suitable for applications with varying power requirements. Additionally, the device’s protection features make it a safe and reliable solution in applications where safety is important.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...