| Allicdata Part #: | VI-26J-MV-S-ND |
| Manufacturer Part#: |
VI-26J-MV-S |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 36V 150W |
| More Detail: | Isolated Module DC DC Converter 1 Output 36V 4.... |
| DataSheet: |  VI-26J-MV-S Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 4.17A |
| Size / Dimension: | 4.60" L x 1.80" W x 0.52" H (116.8mm x 45.7mm x 13.2mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 150W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 36V |
| Voltage - Input (Max): | 400V |
| Voltage - Input (Min): | 200V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are electronic components designed to convert one direct current (DC) voltage level to another. One of the most common kinds of DC to DC converter is the VI-26J-MV-S. Because of their versatility, DC DC converters are found in many modern devices and systems.
Applications
The VI-26J-MV-S DC DC converter is commonly used in applications such as automotive, off-road, mining, electricity generation, telecom, industrial, and military. It is highly reliable for even the harshest environments and can be used to regulate power in off-board or on-board electronics systems. It is commonly used to power intricate electronic circuits, and for DC voltage control.
The VI-26J-MV-S DC DC converter is ideal for providing uninterrupted power in mobile or portable applications requiring fast circuit protection and power regulation. Its low cost and high efficiency make it well suited for high efficiency applications and pulse width modulation (PWM).
Working Principle
The VI-26J-MV-S DC DC converter is a switched mode power supply that converts a constant voltage into a constant, regulated current. It is based on an oscillator circuit that uses the input voltage to drive a switch-mode transistor. The transistor is used to control the current flow, and the current is then rectified and filtered to produce the output voltage.
The VI-26J-MV-S DC DC converter has a wide range of output voltages, from 6 to 36 VDC. The input voltage range is from 4.5 to 36 VDC. It has a maximum output current rating of 10 amps, making it suitable for a wide range of applications.
The VI-26J-MV-S DC DC converter features a high efficiency level, up to 95% in the majority of applications. This translates into low power losses and energy savings for the user. It is also very resilient to power transients, temperature variations and other environmental stresses.
In addition, the VI-26J-MV-S DC DC converter has on-board status and protection features. It offers over voltage protection and a programmable over temperature protection. This ensures that your system is protected from damage due to an unexpected power surge or over temperature condition.
Conclusion
The VI-26J-MV-S DC DC converter is a reliable and cost effective component for power management applications. It can provide efficient and reliable power conversion for a wide range of applications, from medical to military use. Its wide operating temperature range and its low cost make it an attractive choice for many modern electronic systems.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...