| Allicdata Part #: | VI-26J-MY-F3-ND |
| Manufacturer Part#: |
VI-26J-MY-F3 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 36V 50W |
| More Detail: | Isolated Module DC DC Converter 1 Output 36V 1.... |
| DataSheet: |  VI-26J-MY-F3 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 1.39A |
| Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 50W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 36V |
| Voltage - Input (Max): | 400V |
| Voltage - Input (Min): | 200V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electronic components that transform a direct current (DC) input into a DC output. These converters are used in various applications due to their convenience and efficiency, and one popular model is the VI-26J-MY-F3. This unit offers great advantages such as a wide input voltage range, high efficiency, fast transient response, and low output ripple. It can be used for a variety of applications, including automotive, solar, telecommunications, and power systems.
Application Field and Working Principle
The VI-26J-MY-F3 is a non-isolated DC-DC Buck converter, which can convert a higher input voltage to a lower output voltage. This converter can accept input voltages from 4.5 V to 36 V and deliver an output voltage from 0.8 V to 30 V. The maximum input voltage is 36 V, which means that the device can be used with both 12V and 24V automotive systems. The over-voltage protection range can be adjusted to 16 V to 36 V, and the output voltage accuracy is +/-1%. The unit also features a high switching frequency of up to 300kHz.
In addition to these features, this converter also offers wide temperature operation, short circuit protection, and transient response. The maximum continuous output current of the device is 26A, and the maximum output power is 780W. The quiescent current of the unit is 1.2 mA, and the efficiency is above 90%.
The VI-26J-MY-F3 DC-DC buck converter works by using a switching element (usually a MOSFET) to control the output current. This is done by alternating the input voltage, which causes a certain amount of power to be generated. This power is then supplied to the output of the device, allowing it to regulate the output voltage and current according to the user’s requirements. This type of converter is commonly used in inverters, DC power supplies, and automotive systems.
The VI-26J-MY-F3 comes with a wide range of features and is suitable for a variety of applications. It can be used in automotive, solar, and power systems. It can also be used in telecommunication systems, which require reliable sources of power. This type of converter is highly efficient, reliable, and cost-effective.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...