| Allicdata Part #: | VI-26T-EW-F3-ND |
| Manufacturer Part#: |
VI-26T-EW-F3 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 6.5V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 6.5V 1... |
| DataSheet: |  VI-26T-EW-F3 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 15.38A |
| Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 88% |
| Operating Temperature: | -10°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 6.5V |
| Voltage - Input (Max): | 400V |
| Voltage - Input (Min): | 200V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC to DC converters are an electronic device used to convert voltages from one level to another, usually from higher to lower levels. They are often used in automotive, aerospace, telecommunications, and industrial applications.
The VI-26T-EW-F3 is a step-down (buck) DC/DC converter designed to provide a regulated output of 26V from an input voltage range of 32 to 36V. The converter features an input voltage range of 32 to 36V, adjustable output voltage from 10 to 28V, and a maximum switching frequency of 230 kHz. It has a typical open loop efficiency of approximately 85% and is capable of supplying 1.3A continuous output current.
The VI-26T-EW-F3 is designed with a synchronous rectifier topology. It consists of an internal high-side MOSFET switch, a low-side MOSFET switch, high-side current sensing, a controller IC, and a transformer. The input voltage is applied directly to the high-side MOSFET switch, and the low-side switch is driven by the controller IC. The controller IC keeps the output voltage constant by adjusting the duty cycle of the switches in response to changes in input voltage or output load.
The VI-26T-EW-F3 is highly efficient and ideal for applications where precise voltage regulation and long operational life is required. It is suitable for automotive, aerospace, telecommunications, and industrial applications such as LED lighting, LCD displays, medical instruments, and point-of-sale systems. It offers an adjustable output voltage with low ripple and transient response, and is designed to operate reliably over wide temperature ranges.
The VI-26T-EW-F3 is designed for use in a variety of applications, including automotive, aerospace, telecommunications, and industrial applications. It offers precise voltage regulation and long operational life while providing high efficiency and reliability over a wide temperature range. Its robust design allows it to withstand even the harshest industrial conditions, making it suitable for a variety of demanding applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...