VI-26Y-MW-F3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters are devices that convert direct current (DC) from one voltage level to another. They are found in virtually all kinds of electronic equipment, from small portable gadgets such as smartphones and laptops to large industrial applications such as power plants, wind turbines and spacecrafts. One type of converter that is gaining in popularity is the VI-26Y-MW-F3.

The VI-26Y-MW-F3 is a high-efficiency, high-power three-phase DC-DC converter that is designed for high-frequency applications in power electronics. It has low-loss switching components and high-frequency conversion topologies to achieve a high efficiency rating of over 97%. It is ideal for a variety of applications in the power range from 1 kW to 10 kW.

The VI-26Y-MW-F3 DC-DC converter is significantly smaller, lighter and more reliable than its predecessors. It has a wide input voltage range from 250V to 800V and an output voltage range from 0V to 700V. The converter is also designed with on-board protection circuitry to protect the system against transient surge events and ensure reliable operation in extreme environmental conditions.

The main application field for the VI-26Y-MW-F3 is in renewable energy systems such as photovoltaic (PV) systems. The converter is designed to convert the output voltage from the solar panels into a higher voltage level suitable for grid-connected systems. It is also used in wind turbine systems for either grid-connected or stand-alone power production. Finally, the converter can be used for distributed power systems in factories and commercial buildings for both AC and DC power distribution.

Working Principle

The working principle of the VI-26Y-MW-F3 converter is based on a switched-mode approach. This approach is based on the concept of pulse-width modulation (PWM), which is used to control the voltage output of the converter by switching the power transistor at a predetermined frequency. This method allows for more efficient and precise conversion, especially at higher power levels. The converter is comprised of an input stage, a controller stage, an output stage, and several additional components, such as rectifiers and protection circuits.

The input stage consists of a rectifier circuit which converts the incoming AC voltage into a DC voltage for use by the controller. The controller stage consists of a PWM controller which is used to control the switching frequency of the power transistor. This is done by comparing the error signal of the input and the output voltage of the converter in a feedback loop. When the error signal indicates that the output voltage is above the desired level, the controller decreases the switching frequency, and vice versa.

The output stage is responsible for the actual conversion of the input voltage into the desired output voltage. This is done by a power transistor which is switched in accordance with the PWM frequency determined by the controller. Finally, the additional protection components such as transient suppression devices and TVS diodes ensure safe operation even in extreme environmental conditions, such as in lightning strikes or power surges.

The VI-26Y-MW-F3 DC-DC converter is a reliable and efficient converter for a wide variety of applications in renewables, such as PV systems, wind turbines and distributed power systems. It is a high-efficiency, high-power solution that has a wide input voltage range, a high efficiency rating, and on-board protection circuitry for reliable operation in extreme conditions.

The specific data is subject to PDF, and the above content is for reference