
Allicdata Part #: | VI-274-CX-B1-ND |
Manufacturer Part#: |
VI-274-CX-B1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 48V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 48V 1.... |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | 0.00000 |
Specifications
Current - Output (Max): | 1.56A |
Size / Dimension: | 4.60" L x 2.40" W x 1.07" H (116.8mm x 61.0mm x 27.1mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 48V |
Voltage - Input (Max): | 375V |
Voltage - Input (Min): | 100V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters are an electrical device used to convert a source of direct current (DC) electrical power from one voltage level to another, which is accomplished by using various forms of electrical components. One particular type of DC DC Converter is the VI-274-CX-B1. This device is primarily used for transforming an input voltage of up to 3.6 volts DC to a regulated output voltage of up to 5 volts DC.The VI-274-CX-B1 requires no power in order to function, which increases the system’s efficiency and reduces system costs. It has two input terminals: Vin and GND, and one output terminal: Vout. The Vin terminal is connected to the input voltage supply and GND is connected to the system ground. The output terminal is connected to the regulated output voltage source. When the voltage reaches the upper threshold of the voltage input range, the output voltage will automatically change accordingly.The VI-274-CX-B1 works by using an inductor circuit to boost the input voltage, thus increasing the output voltage. It also uses a switching component to control the flow of the current and maintain a stable output voltage. The input voltage is rectified using a MOSFET transistor for fast, smooth switching. The capacitor located between VIN and GND act as an energy storage device, and sourcing the energy required during the off-state of the MOSFET.The working principle of this device is based on the “Boost Converter” topology of DC DC converters. This convenient topology minimizes the number of external components required and provides fast and efficient voltage conversion. The VI-274-CX-B1 also has thermal protection, under-voltage lockout and short circuit protections designed in order to protect the device from over-voltage, over-current and short-circuiting.Overall, the VI-274-CX-B1 is an efficient and cost effective DC DC converter ideal for a variety of applications, such as power supply for embedded systems, telecom, portable electronics, automotive, and other uses which require a low-cost, reliable solution.
The specific data is subject to PDF, and the above content is for reference
Latest Products
AEQ20B48N-6L
DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-L
DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-6L
DC DC CONVERTER 12V 240WIsolated Module ...

AEO40Y48N-6L
DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-L
DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-6L
DC DC CONVERTER 1.8V 120WIsolated Module...
