VI-2NH-CU-F2

Current - Output (Max):	3.85A
Size / Dimension:	4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-25°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	200W
Series:	VI-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	52V
Voltage - Input (Max):	76V
Voltage - Input (Min):	36V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DCD converters are the most important electronic component in any electrical system. These devices convert electrical energy from one form to another, usually from a higher voltage to a lower voltage. They are used in a wide range of applications.The VI-2NH-CU-F2 is a DC-DC converter suitable for applications where high efficiency is required. It is designed to achieve a maximum of 90% efficiency at 230V AC input voltage. The operating temperature range is from -20°C to +70°C. It is also suitable for use as a step-down converter and has a maximum output current of 5A.The VI-2NH-CU-F2 operates by using a switching regulator system. This is done by using a switch element on the input side and an inductor on the output side. The switching regulator uses pulse width modulation (PWM) to control the current flowing into the output voltage.When the switch turns on, the inductor is charged up with current from the input voltage. When the switch turns off, the stored energy in the inductor is transferred to the output voltage and supplies it with current.The VI-2NH-CU-F2 has a wide range of applications. It can be used in various power supplies, such as switching mode power supplies (SMPS) or DC-DC converters. It can also be used in a variety of electronic circuits, including battery chargers, LED drivers, current regulators, photovoltaic systems, and many other circuits.The VI-2NH-CU-F2 has a high efficiency and low power dissipation. It also has a high power factor and low total harmonic distortion (THD). These features make it an ideal choice for high power applications.In conclusion, the VI-2NH-CU-F2 is an excellent DC-DC converter for various applications, including battery chargers, LED drivers, current regulators, and photovoltaic systems. It is an efficient and reliable device, which provides a high output power and low power dissipation.

The specific data is subject to PDF, and the above content is for reference