| Allicdata Part #: | VI-2NT-MX-ND |
| Manufacturer Part#: |
VI-2NT-MX |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 6.5V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 6.5V 1... |
| DataSheet: |  VI-2NT-MX Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 11.54A |
| Size / Dimension: | 4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 6.5V |
| Voltage - Input (Max): | 76V |
| Voltage - Input (Min): | 36V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are used to convert one DC voltage to another DC voltage level. The VI-2NT-MX DC DC converter is designed to convert one low voltage DC input to a high voltage DC output. The input voltage range is from 10 to 15 volts and the output range is from 16 to 48 volts. The device is designed to provide adjustable output voltage with high efficiency and reliability.
The VI-2NT-MX DC/DC converter has three main components: the primary transformer, the control circuit, and the output filter. The primary transformer is used to step up the voltage from the input to the desired output. The control circuit controls the output voltage by modulating the voltage applied to the primary transformer. The output filter smoothes out the ripple voltage that is created in the conversion process.
The primary transformer is essentially a boost transformer with two windings, the primary winding and the secondary winding. The primary winding receives AC voltage from the control circuit and applies it to the primary transformer windings. The secondary winding on the other hand, steps up the voltage from the primary winding to the desired output voltage level. The output voltage is then smoothed out by the output filter for use in a variety of electronic systems.
The control circuit controls the output voltage by modulating the voltage applied to the primary transformer. This is done by adjusting the duty cycle of the AC voltage applied to the primary transformer. This duty cycle is controlled by the use of a frequency synthesizer, which produces a predetermined pulse waveform with adjustable frequency and duty cycle. The duty cycle of the pulse waveform is adjusted to achieve the desired output voltage.
The output filter is the last component in the DC/DC converter. The output filter is used to smooth out the ripple voltage that is created by the conversion process. The output filter consists of inductors and capacitors which filter out the high frequency components of the output voltage. This ensures that the output voltage is smooth and clean for use in a variety of electronic systems.
The VI-2NT-MX DC/DC converter is designed to provide adjustable output voltage with high efficiency and reliability. It is a highly versatile device which is suitable for use in a variety of electronic systems. The device is widely used in communications, automotive, and industrial applications for reliable power conversion.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...