| Allicdata Part #: | VI-2T1-MW-F3-ND |
| Manufacturer Part#: |
VI-2T1-MW-F3 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 12V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 12V 8.... |
| DataSheet: |  VI-2T1-MW-F3 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 8.33A |
| Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 12V |
| Voltage - Input (Max): | 160V |
| Voltage - Input (Min): | 66V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are widely used for power transfer applications due to their high efficiency, low cost, and low profile. One of the most popular types of DC-DC converters is the VI-2T1-MW-F3 converter. This converter is especially useful in applications such as consumer electronics, robotics, industrial systems, and motor drives. The VI-2T1-MW-F3 converter takes a low voltage DC power source and converts it into a higher voltage DC output.
The VI-2T1-MW-F3 converter is based on a full bridge rectifier topology. It consists of two power stages: the input stage and the output stage. The input stage includes two MOSFET switches with respective diodes, a transformer, and the rectifier. The output stage has two current sensing resistors and a MOSFET driver.
The input stage of the converter receives low voltage DC input and converts it through a transformer, which adjusts the voltage to the desired output voltage. The transformer also serves to isolate the input voltage from the output voltage. The rectifier then converts the alternating current from the transformer into direct current at the output of the converter.
The output stage of the VI-2T1-MW-F3 consists of two MOSFETs with respective diodes and a MOSFET driver. The MOSFETs are connected in parallel and switch alternately to provide an uninterrupted direct current output. The output stage also includes two current sensing resistors which are used to regulate the output voltage by adjusting the current through the MOSFETs.
The VI-2T1-MW-F3 converter is a highly efficient and cost effective solution for applications requiring a high voltage DC output from a low voltage DC input. Its full bridge rectifier topology is ideal for applications with fast switching speeds and high efficiency. It is also small in size and can be easily integrated into existing systems. The VI-2T1-MW-F3 converter is an ideal choice for applications in consumer electronics, robotics, industrial systems, and motor drives.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...