VI-2TH-IV

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are devices that convert electrical power from one DC voltage into another, providing a regulated output despite changes in input voltage or load. VI-2TH-IV are efficient and robust dc-dc converter that have already found wide application in automotive, industrial and communications systems.

Basic Working Principle

VI-2TH-IV uses buck-converter topology which converts the input voltage into a lower-level regulated output voltage. The converter uses two transistors (2TH) and four diodes (IV), arranged in a square and operated in a -90° mode, to transfer energy from the input to the output. A steady pulse-width modulation (PWM) signal is used to control the negative transistor as an on-off switch during the buck-conversion process. The two inductors L1 and L2 are used to store the energy consumed by the load while power is supplied from the input. The charging of the inductors is timed by two logic signals Vp1 and Vp2 which are obtained from a combination of the input voltage and the PWM signal.

Switching Characteristics

VI-2TH-IV is a synchronous buck converter and hence the power switches (2TH\'s) operate at the same frequency. The frequency used is determined by the duty cycle of the PWM signal, which is directly proportional to the output voltage. The output voltage is regulated by the pulse width modulation of the switches which is achieved through the feedback signal. When the feedback signal is low, the voltage is regulated at a low level and when the feedback signal is high, the voltage is regulated at a high level. The switching characteristics of the converter determines the efficiency, power dissipation, ripple and dynamic response of the system.

Application Field

VI-2TH-IV is widely used in automotive, communication and industrial applications due to its efficiency and robust design. In automotive applications, it is used to power electrical components such as lights, fans, electric fuel pumps, transmissions and alternators. In communication systems, VI-2TH-IV is used as a voltage regulator for radio transceivers and base stations. It is also used in industrial controls, to provide the correct voltage to the measurement circuits such as resistors, capacitors or strain gages.

Conclusion

VI-2TH-IV is an efficient and robust DC-DC converter that use the buck-converter topology. It is capable of providing a regulated output voltage and is suitable for applications in automotive, industrial and communication systems. The switching characteristics of the converter determine its efficiency, power dissipation, ripple and dynamic response. It is a popular choice for powering electrical components in automobiles, providing the correct voltage to measurement circuits in industrial controls and for serving as a voltage regulator in radio transceivers and base stations.

The specific data is subject to PDF, and the above content is for reference